Chemical Fume Hoods
These hoods, offered by renowned brands like Labconco, AirClean Systems, and Hemco, provide a range of scientific purposes. These chemical fume hoods provide staff with a safer work environment and are ideal for containing and venting hazardous fumes.
They efficiently protect against chemical exposure during experiments and processes involving volatile substances. Their versatile applications span various scientific disciplines, including chemistry, biology, and pharmaceutical research. These hoods boast sturdy construction, efficient airflow, and customizable configurations, catering to specific laboratory needs.
Compatible with various lab equipment, they seamlessly integrate into experimental setups, ensuring optimal functionality and safety. Explore our collection of chemical fume hoods, chemistry hoods, fume hood blowers, and chemical hoods today to equip your lab with essential safety measures and enhance efficiency within the lab.
-
HEPA Filters
AirClean® SystemsHEPA filters are designed to trap particulate and can be used in ductless fume hoods or laminar flow products. Ideal for use as a clean room HEPA filter. Required for laminar flow products. Filter Type: ACFHEPA Application: Containment of particulate only. Filter efficiency 99.997%…
-
Exhaust Snorkel
INSTOCK LabsLab Exhaust Snorkels are suitable for the removal of heat or nuisance fumes. Exhaust Snorkels need to be tied into the general exhaust for the lab. Each lab snorkel is furnished with 5.5" mini hood that will accept the optional hoods noted. The two outermost joints can rotate and swivel…
-
SpillStopper Work Surface molded of corrosion-resistant solid epoxy. Dished & contoured to conform to interior liner of Protector Pass-Through Hoods. Pre-drilled 2.5" (6.4cm) dia plumbing holes.
-
AirMax™ Total Exhaust Fume Hoods w/ Wet Fume Scrubber
AirClean® SystemsAirMax™ polypropylene total exhaust fume hood with scrubber package. Package includes; Microprocessor controller, polypropylene base cabinet, recirculation tank and pump, spray down bar, necessary internal pipe works, fluorescent light and vertical safety glass sliding sash. 110V AC.
-
Filtermate Portable Exhausters
LabconcoCompact, corrosion-resistant housing Inherently safe design An accessory for the Demonstration Hood, XPert Balance Enclosure, Protector® XVS Ventilation Station or Protector® Work Station, the FilterMate uses a HEPA filter, carbon-based filter or a combination of both filters…
-
Vertical Laminar Flow Workstations with UVTect Microprocessor Controller
AirClean® SystemsAirClean® Systems AC600 Series vertical laminar flow workstations are ideal for non-hazardous applications that require a clean work area. These compact, lightweight workstations provide positive-pressure, ISO 5 air throughout the chamber and sash opening, thus keeping airborne particulate away…
-
Cyanoacrylate Fuming Chambers
Mystaire®Safely Fume Evidence with Consistent Results Mystaire® CA Series cyanoacrylate fuming chambers are the standard by which automated latent print development chambers are measured. The patented* recirculation filtration system with precise process controls for time, temperature and humidity…
-
Solid Epoxy Work Surfaces
LabconcoBlack chemical-resistant work surface is contoured to fit the dimensions of the enclosure and to contain spills. These surfaces can be used with Protector XVS Ventilation Stations, Protector Work Stations, Purifier Non-Ventilated PCR Enclosures and Tissue Culture Enclosures.
-
XPert Filtered Balance Systems provide user protection by keeping powders and particulates contained during weighing procedures. Patented features include an ergonomic air foil with Clean-Sweep openings to enhance airflow and a zone-perforated rear baffle that creates horizontal laminar airflow to…
-
Protector Airo Filtered Fume Hoods
LabconcoThe Protector® Airo™ Filtered Fume Hood has a compact design that avoids potential challenges of existing lab conditions while still providing space, utility and options of a traditional hood. It features all of the characteristics of Labconco Protector Hoods including the patented…
-
The Protector® Echo™ Floor-Mounted Filtered Fume Hood combines the trusted filtration of Erlab’s Neutrodine® Unisorb Filter with the quality, innovation and energy-efficient fume hood designs of Labconco's unparalleled engineering to create an adaptable fully-featured…
-
Base cabinets built to last! UniLine Fume Hood Base Cabinets are constructed of top grade furniture steel and finished in a chemical resistant powder coated finish meeting or exceeding SEFA 8 recommended practice for laboratory casework. UniLine Base Cabinets set the standard for safety and…
-
Table Top Mount Lab-Frame Kits for Fume Hoods
Lee EngineeringFrame Measures: 36" x 38" x 9" Chamfered Ends Rods are corrosion-resistant
-
The Protector® Echo™ Floor-Mounted Filtered Fume Hood combines the trusted filtration of Erlab’s Neutrodine® Unisorb Filter with the quality, innovation and energy-efficient fume hood designs of Labconco's unparalleled engineering to create an adaptable fully-featured…
-
Protector Echo Filtered Fume Hoods
LabconcoThe Protector® Echo™ Filtered Fume Hood combines the trusted filtration of Erlab’s Neutrodine® Unisorb Filter with the quality, innovation and energy-efficient fume hood designs of Labconco's unparalleled engineering to create an adaptable fully-featured fume hood that…
-
The Protector® Echo™ Floor-Mounted Filtered Fume Hood combines the trusted filtration of Erlab’s Neutrodine® Unisorb Filter with the quality, innovation and energy-efficient fume hood designs of Labconco's unparalleled engineering to create an adaptable fully-featured…
-
Protector Echo Filtered Fume Hoods
LabconcoThe Protector® Echo™ Filtered Fume Hood combines the trusted filtration of Erlab’s Neutrodine® Unisorb Filter with the quality, innovation and energy-efficient fume hood designs of Labconco's unparalleled engineering to create an adaptable fully-featured fume hood that…
-
Canopy hoods are designed to collect and exhaust corrosive vapors, heat, steam, and odors when mounted over areas with water baths, hot plates, or portable equipment. Made of type 304 Stainless Steel, the Canopy Fume Hood’s glass smooth surfaces provide superior chemical, corrosion and heat…
-
Epoxy coated steel, belt drive, exhaust blowers for canopy hoods based on duct runs under 25ft and no more than 4 elbows. These exhaust blowers are designed to maintain between 80 to 100FPM.
-
Protector Echo Filtered Fume Hoods
LabconcoThe Protector® Echo™ Filtered Fume Hood combines the trusted filtration of Erlab’s Neutrodine® Unisorb Filter with the quality, innovation and energy-efficient fume hood designs of Labconco's unparalleled engineering to create an adaptable fully-featured fume hood that…
-
SpillStopper Work Surfaces are compatible with Protector (Premier or XStream) Laboratory Hoods with Eco-Foil(TM) Air Foil. Molded from a special formulation of corrosion-resistant epoxy resins, these work surfaces are dished and contoured to conform to the interior liner of Protector Laboratory…
-
Protector Echo Filtered Fume Hoods
LabconcoThe Protector® Echo™ Filtered Fume Hood combines the trusted filtration of Erlab’s Neutrodine® Unisorb Filter with the quality, innovation and energy-efficient fume hood designs of Labconco's unparalleled engineering to create an adaptable fully-featured fume hood that…
-
The Protector XL Benchtop Laboratory Hoods offer superior design flexibility. Their panel liners are supplied in three depths to meet individual installation and application requirements. Protector XL Benchtop Laboratory Hoods are suitable for general chemistry applications. Features …
-
-
Latitude™ Fentanyl Filtered Hood
Mystaire®The Mystaire® Latitude Fentanyl Filtered Hood is designed for safe, effective containment of fentanyl and its analogues during manipulation and laboratory analysis. Exposure to fentanyl and other opioids can pose great danger to law enforcement personnel. The Latitude Fentanyl Filtered Hood…
-
AirMax™ Total Exhaust Fume Hoods
AirClean® SystemsAirMax™ polypropylene total exhaust fume hood with interior flame retardant polypropylene and epoxy work surface. Price includes fluorescent light and vertical safety glass sliding sash.
-
Proper filtration selection is critical to ensure operator safety from potentially harmful odors, vapors and airborne particulate. When selecting a filter for your application, Mystaire® reviews the complete application to make certain the proper filtration package is selected. At our…
-
gGuard® Communication Software Automatically collects and records hood data, alerts and alarms on a customer-supplied personal computer Monitors, manages and provides data via email to a designated facility manager Provides access to the following: usage authorization, filter…
-
PowderSafe™ Type B Enclosures
AirClean® SystemsSeamless polypropylene construction provides the mass and vibration resistance crucial for accurate powder weighing, while the AirSafe™ automatic safety controller monitors airflow and filter conditions. The full rear-wall HEPA filtration zone moves powders and particulate away from the…
-
Universal Fume Hoods
HemcoThe Universal Fume Hood is designed for light to medium duty fume removal, and offers such features as a sturdy dual wall construction, and a fully vertical sliding sash. It is completely molded of fire retardant fiberglass. Thomas Numbers 1167M01-M04: Units do not have a blower and require a…
-
PowderSafe™ Bulk Handling Enclosures
AirClean® SystemsWhen effective powder containment is needed during bulk manipulation, the PowderSafe Bulk Handling enclosure is an economical and space-saving alternative to larger walk-in enclosures. With a unique drum access port incorporated into the base of the enclosure, the drum can be raised and sealed to…
-
Simpler to use, Safer to operate Erlab’s CaptCaptairStore Filtering Chemical Storage Cabinets are designed with advanced carbon filtration, Flex Technology and a simple, innovative way to keep you safe. With the push of one button, it will set you free of limitations in order to focus…