Polymeric Sanitary Clamps: Click-To-Connect. Threadless Sanitary Clamps that do not need tightening, simply click the arm in place! Robust fit up that protects against inconsistent tightening by operators No risk of connection loosening during transit or handling Ensures gasket alignment…

Stainless steel electro-polished finish or nickel-plated zinc construction. Double Buret Clamp holds any size buret from micro to 100mL capacity. Simply compress the scissor-like mechanism, insert buret and gently release to grip. Numbers and graduation on buret remain easy to read. For height…

Durable stainless steel construction PVC coated jaws Comes with boss head for convenience and versatility in lab setups Thumbscrew allows for easy and secure fitting Overall length in 9.5" Universal 3 pronged clamp with chemical resistant PVC coated jaws. 9.5" Total length with a convenient…

3 Prong Adjustable Universal Clamp with a 10" overall length and 0.375 diameter rod Perfect for holding both regular and irregular shaped glassware Accommodates objects up to 2.5" Adjustable thumb screws on both sides allows for a wider range of accommodation Non-slip vinyl coated rubber prongs…

Large grip adjustment range 3-prong construction Single or dual adjust Nickel-plated zinc Designed to securely hold every type of laboratory glassware and apparatus. Long, seamless nickle-plated brass tubing attaches clamp head securely and offers easy positioning in the deepest…

These rugged laboratory support jacks provide stable height adjustment for various items in the lab such as flasks, beakers, water baths, and other small equipment. They are constructed of heavy duty aluminum alloy for years of trouble-free performance. The jacks are easy to clean, rust-proof,…

Features:  S.S. Uprights and Heavy Duty PTFE Coated Aluminum Fittings Provide Maximum Strength and Chemical Durability.  Supports TWO Reactors side by side from 300mL to 5L.  Removable Polyethylene Spill Tray. Adjustable Middle Support Bracket is Vertically…

Laboratory support jacks are constructed of chemically resistant anodized aluminum and stainless steel. The scissor jack design enables height adjustment with a simple turn of the knob. LBJK44 has a 4" x 4" platform that can be vertically adjusted fro

Set includes retort base, rod, support ring and 4-pronged cork-lined clamp and bosshead Upgraded design now includes a two-piece stainless steel rod that effortlessly screws together, ensuring easy setup and enabling more compact storage when not in use The 8"L x 5"W base weighs 1.75lbs,…

0209X58: Tubing Holder for Beakers This polypropylene plastic clip holds flexible tubing steady and fits securely onto the edge of beakers or pitchers up to 1/4" thick. 5.1cm (2") long arm has a hole to accept tubing up to 9.5mm (3/8") O.D. Autoclavable …

DIE CAST ALLOY Die cast alloy construction is strong and corrosion-resistant WIDE JAWS 3-finger jaws on clamp open to 3.5” (90mm) wide for holding a wide range of glassware sizes and volumes PVC COATED PRONGS PVC-coated prongs provide a strong, slip-free hold that won’t scratch objects.…

3-Prong Univeral Clamp with Extra Large Bosshead INDUSTRIAL QUALITY High performance, die casted metal retort clamp, suitable for holding irregular shaped items. The clamp features three, vinyl coated prongs that are specifically designed for maximum traction and grip DOUBLE…

Corrosion resistant. The hook allows for one-handed assembly of two components with one adjustment screw. Legal Information: LabJaws is a trademark of Henry Troemner LLC

Designed to hold Erlenmeyer flasks Constructed of type 302 and 304 stainless steel Includes hardware for easy attachment to platforms Flask clamps are supplied with a spring to hold flask in place (except 25mL size)

These stands have nickel-plated rods, and heavy, corrosion-resistant bases for stability. They come as a set with support rings included. Stamped Steel Base #4-SSS66-R2 : Base [4" x 6"], Rod [18" x 5/16"], 2 Rings [diameter 3", 4"] #4-SSS67-R3 :…

Support rings with clamp, cast iron.

Screw-Clamp Compressor No-slip jaws Strong, open-jaw type nylon tubing Accepts tubing up to 6.4mm (1/4") O.D. Angled jaws prevent tube from slipping out Swing Jaw™ Tubing Clamps For all fixed tubing Zinc-plated steel clamp provides non-slip closure for flexible…

Similar to CG-1947, support clamp is designed to fit just below the flange of all Chemglass Reactors and permits Reactor lid to be detached without removing the Reactor body from the support clamp. Improved clamp is hinged on one side to swing open and allow complete access to install/remove…

Test tube clamp for all sizes of test tubes. Available with and without finger grips in both Brass Wire and Steel wire with a brass finish. Note: Wooden test tube holder can accommodate test tubes from 12mm to 25mm in diameter.

This deluxe set includes a support stand (5” x 8”) with support rod (20”), support ring (3”), a 2-prong extension clamp with cork lined jaws and a clamp holder. The support rod includes a 3” long rod to provide more torque when securing the rod to the base plate.

Features 3/4" S.S. Pipe (1.050" OD) Uprights and Heavy Duty PTFE Coated Aluminum Fittings Provide Maximum Strength and Chemical Durability All S.S. Uprights are Passivated to Inhibit Corrosion Adjustable S.S. Shelf/Tray Supports Reactors from 250mL to 5L Single…

Clamp is designed to fit 4 inch conical flanges, allowing the top half to be removed without disturing the lower half. Clamp features and extension arm (1/2 x 8 inch) suitable for attachment to an appropriate support stand or lab frame. Silicone liner will withstand temperatures up to 500ºdegF.

Rugged stainless steel deck and lift mechanism for long life in corrosive environments Ideal for use in fume hoods, solution-baths, marine and industrial laboratories Support miniflasks, jars, columns, large baths, magnetic stirrers, heaters and more Resistant to sanitizing…

Jumbo sized clamp holder Fits rods 5mm-20mm in diameter Metal thumb screws with grip allows for easy adjustment Universal Clamp Holder, Jumbo Sized - Holds Rods up 20mm in Diameter (1) Clamp This universal clamp holder, made of durable metal, holds 2 rods perpendicular to one another.…

A great way to be prepared for your next clamping situation! Kit contains 5 each, of all 13 sizes, neatly organized in a polypropylene box with adjustable dividers.

Stainless Steel Quick Release clamp for use with two-piece Pressure Reaction Flasks and Heads with Duran flanges. Available with or without rod for clamping to support frame. Note: Ensure proper bottom support for your reactor, the clamp is only recommended for stabilization, not support.

Ideal uses for beakers, Erlenmeyer flasks, test-tubes, boiling (Florence) flasks, burettes. For securing the clamp to a frame or other apparatus an additional holder (sold separately) will be needed. Please see recommended Boss Head list. The screw adjustment allows for precise pressure when…

Aluminum alloy clamp Metal clamping screws Includes: (1) Boss head For use with laboratory stands, this popular boss head is made of die casted alloy with a powder coat finish. It accepts rods at a right angle to one another. Metal thumbscrews allow for adjustment.  

Heavy cast iron triangular bases with black enamel finish include a zinc plated steel rod.

Regular Clamp Holders Stainless steel electro-polished finish or nickel-plated zinc construction. Ideal for holding clamps to lab-frames. Use wherever clamping at 90° is required. Swivel Holders Two rod holders with center swivel capacity allow tilting of clamps at any angle in…

Two prong zinc-plated, stamped steel with aluminum alloy holder is adjustable by checknut to any angle Takes objects from 3/8” to 1 3/8” diameter. Fits rods up to 1/2” diameter. Length: 6 3/8”.