Clamps/Supports Products (40)

Compare Tool

Select up to 3 products

  • Support Rings with Clamp

    Solid ring with built in clamp for attachment directly to support rod. Available in three sizes. Nickel plated zinc alloy.

  • Support Clamps, Stainless Steel, Improved

    Similar to CG-1947, support clamp is designed to fit just below the flange of all Chemglass Reactors and permits Reactor lid to be detached without removing the Reactor body from the support clamp. Improved clamp is hinged on one side to swing open and allow complete access to install/remove reactor...

  • Flask Support Ring, Rubber

    Flask support ring has a concave recess on top to support round bottom flasks from 250 to 500mL. 5-1/8" diameter.

  • Pinch Clamps, Stainless Steel

    Made entirely of stainless steel. Part numbers CG-150-01 and CG-150-03 are supplied WITHOUT a screw type locking device. All other sizes have the screw type locking device.

  • Support Base

    Chemglass

    SUPPORT BASES, RECTANGULAR SHAPED Base is made of cast iron with a black baked finish. Dimensions are 140 x 200mm. Base has two holes, one centered and one at the end of the short side. Rod is 10mm O.D. x 600mm (24”) in height. Total assembled weight is 1Kg. SUBLIMATION APPARATUS,Two-piece...

  • Keck Clamps

    Chemglass

    Made of Delrin®, the clamp is non-corrosive and will not scratch glass. Can be used to 140°C. Color coded for easy identification. SOLD IN PACKAGES OF 10.

  • Chain Clamp

    Chemglass

    CLAMPS, CHAIN, 12IN EXTENSION, Similar to the CG-9220-01 except has a 12" long arm. Clamp can accommodate up to 6-1/2” (170mm) O.D. respectively. Quick slip-on chain connection has large, easy-to-turn adjusting knob. Grip is vinyl coated. VALVES, CHEM-VAC, HIGH VACUUM, LOW HOLD UP,...

  • Stainless Steel Clamps for Duran® Reaction Flanges and Lids, PTFE Coated

    Similar to CG-141 but with the entire clamp PTFE coated for chemical durability.

  • Support Rings, with Openings

    Manufactured from steel wire and zinc plated, rings have an opening to permit items such as separatory funnels to be inserted without removing the support ring from the base. Available in three sizes.

  • Clamps

    Chemglass

    CLAMPS, BURET, Clamp will hold two burets from micro to 100mL. Spring loaded mechanism adjusts simply by squeezing, yet hold buret firmly in place. Mounts directly to standard support rod with built in hook connector. Constructed of epoxy coated aluminum with vinyl jaws. CHEMGLASS LAB CLAMPS,...

  • Stainless Steel LabJacks

    Support Jack provide for stable height adjustment and support for items in the lab such as flasks, baths or hot plate stirrers. Top and bottom plates are constructed of stainless steel while the support mechanism is made of chrome plated steel.

  • Support, Solid Tripod

    Base is made of cast iron with a baked black finish. Rod is 10mm O.D. x 600mm (24 ". Available in two sizes.

  • PTFE Support Rings

    PTFE support ring used to support round bottom flasks or cylindrical reaction vessels.

  • Anodized Aluminum LabJacks

    Laboratory support jacks provide for stable height adjustment and support for items in the lab such as flasks, baths or hot plate stirrers. Top and bottom plates are constructed of anodized aluminum while the support mechanism is made of chrome plated steel.

  • ChemRxnHub™ Support Stands

    Features: S.S. Uprights and Heavy Duty PTFE Coated Aluminum Fittings Provide Maximum Strength and Chemical Durability.  Supports Reactors from 300mL to 5L.  Removable Polyethylene Spill Tray.  Adjustable Middle Support Bracket is Vertically Adjustable. It Accepts Our 100 and 150mm...

  • Support Tubes, Stainless Steel

    These support tubes are made of brilliant polished 304 stainless steel. They have good surface hardness and do not score from clamp binding screws. Tubes are 1/2" (13mm) in diameter, and are hollow, reducing weight to 1/2 of solid stainless steel rods while maintaining all the advantages of the...

Compare Tool

Select up to 3 products