Because Empty Shelves Are Sad Shelves
Select up to 3 products
These hand-driven PYREX®; tissue grinders are supplied with two pestles to ensure dissociation of cells into fine particles with minimal damage to cell nuclei. Dounce homogenizers are particularly useful in enzyme studies where heat build-up must be avoided. The internal diameter at the bottom...
Produces a relatively coarse homogenate For cellular work where the nucleus remains intact after homogenization All glass construction * Stated clearances for the tubes and pestles are “total” not “annular”.
The Humboldt, Small, Riffle-Type Sample Splitter supports the following standards: ASTM B215, ASTM C136, ASTM C702, ASTM C778, ASTM D421, ASTM D424, ASTM D457, ASTM D806, AASHTO T27, AASHTO T144, AASHTO T248 Humboldt, Riffle-type sample splitter can be used to divide or halve dry materials such as...
The grinding vessel, a round bottom tube with 2 mm wall, has grinding chamber made of precision bore tubing and top reservoir with pouring spout, to accommodate displaced fluid. Unground walls are completely transparent. Pestle is rounded to conform to bottom of grinding chamber and is either...
Borosilicate glass With precision made interchangeable pestles and tubes Clearance between pestle and tube 0.1 - 0.15 mm Designed for hand operation, but can be slow-speed motor driven by inserting a rubber stopper and metal rod into pestle Hollow handle permits packing with ice Expanded reservoir...
Wheaton 33 low extractable borosilicate glass Precisely constructed with completely interchangeable parts Especially for use in preparation of tissue homogenates, etc. PTFE pestle for soft tissue Grinding chamber clearance is 0.1 - 0.15 mm Unit can be autoclaved These units are designed for use in...
Humboldt, Riffle-type sample splitter with removable hopper can be used to divide or halve dry materials such as cement, gravel, powdered ores, coal, coke, sand, soils, etc. Material poured into the hopper is divided into two equal portions by a series of chutes that discharge the material...
Batch mill for 2 different grinding procedures: Impact grinding of hard, brittle or non-elastic grinding materials with high-grade stainless steel beater. This beater can be used for a Mohs hardness up to 6 (incl. with delivery). Cutting grinding for pulverizing soft, fibrous materials with a...
Precision large and small tissue grinder systems Ready-to-use Packaged in a sterile peel pouch Completely disposable Grinder tube doubles as a specimen container for transport and storage. Protective sleeve helps to contain aerosolization created during grinding. Tissue is ground quickly due to...
These PYREX® Potter-Elvehjem tissue grinders (homogenizers) are used in preparing small samples for pathological and biochemical studies. Homogenization occurs as the sample and buffer are forced through the cylindrical portion of the mortar as the pestle is rotated downward. Mortar is not...
High quality laboratory knife mill for grinding and homogenizing Homogenous samples for accurate analysis Industrial quality for demanding applications Programmable operating parameters for reproducible results The mill is designed for the fast and efficient processing of foodstuffs with high water,...
Grinds materials, by both impact and abrasion, that other grinders cannot Easy-to-use Very rapid grinding action Consistent particle size Air swept for easier cleaning and less thermal degradation USDA approved for NIR sample preparation Mill is designed for the rapid grinding of soft to medium-hard...
Similar to 3432N40 series, but with PTFE pestle and an unground glass tube Ideal for soft tissues Clearance between pestles and tubes is .004 to .006 inches* Pestle can be motor driven (see Thomas number 3411E25 for Drive Unit) Available in working capacities of 0.5, 1, 3, 5, 8, 17 and 45 mL . Sizes...
Process materials up to 9 Mohs Closed grinding chamber with Plexiglas window Timed or continuous operation Wet or dry grinding Mortar grinders reduce inorganic and organic substances to analytical fineness. They can mix and homogenize powders, suspensions and pastes. Grinders are also useful for the...
The Humboldt, Enclosed Model, Riffle-type Sample Splitter supports the following standards: ASTM C702, ASTM D410, ASTM D3013, ASTM D3176, ASTM D3180, AASHTO T248 Humboldt, enclosed model with drawer pans, Riffle-type sample splitter can be used to divide or halve dry materials such as cement,...
Consists of piston-type Teflon® pestle with stainless steel shaft and replaceable grinding vessel of borosilicate glass Eliminates ground glass from homogenate; Teflon minimizes heat generated in use Completely autoclavable Precisely controlled grinding clearance Pestles and vessels...