ICP-MS Products (465)

Compare Tool

Select up to 3 products

  • > Next
  • ICP-OES Nebulizers

    Agilent Technologies

    Agilent offers a wide range of concentric and microconcentric glass nebulizers to facilitate sample introduction for a variety of ICP-OES measurements. Nebulizer styles can accommodate samples with up to 20% total dissolved solids (TDS) and slurry samples containing more than 20% total dissolved...

  • CTFE Liquid Fitting - female

    CTFE Liquid fitting - female with barb end

  • Axial Purge Extension Window for Optima 3x00/4x00/5x00/7x00 DV/8300

    The Axial View Purge Extension Window is a replaceable quartz window that slides into the purge extension between the torch and the optics. The Radial View Purge Extension Window Tube is a replaceable quartz Tube that slides into the mount between the torch and the optics for the radial view.

  • GemCone High Dissolved Solids Nebulizer

    High solids Gem Cones are for samples with high dissolved solids (up to 20%). This cone spray nebulizer allows you to analyze samples with higher solids concentration than is possible with a Cross-Flow nebulizer. Gem Cone nebulizers require an end cap for use with Ryton Scott Spray Chambers. High...

  • 1-Slot Quartz Torch for Avio 200/500

    Demountable design using one-piece quartz tubing for plasma and auxiliary gas flow. Available in a wide range of styles from 0-slot to 3-slot torches, depending on instrument and application needs. Torches without slots are recommended for organic solvents. 1-slot torches are the standard torch for...

  • Self-Aligning RF Load Coil Assembly for NexION 300/350 & ELAN 6x00/9000/DRCs

    This kit includes: 46 cm Copper Refrigeration Tube, Qty. 1 (W1038883) Brass Nut for 3.175 mm Swagelok Tube Fitting, Qty. 2 (WE011094) Brass Back Ferrule for 3.175 mm Swagelok Tube Fitting, Qty. 2 (WE011095) Brass Front Ferrule for 3.175 mm Swagelok Tube Fitting, Qty. 2 (WE011096) Coil Forming...

  • Cyclonic/Concentric Sample Introduction Module for Avio 200

    This module kit includes: Baffled Cyclonic Spray Chamber, Qty. 1 (N0791352) 2 mm Alumina Injector, Qty. 1 (N0791183) 1-Slot Quartz Torch, Qty. 1 (N0790131) MEINHARD Type K Nebulizer, Qty. 1 (N0777707) Nebulizer Connector Assembly, Qty. 1 (N0791018) Injector Adapter Kit, Qty. 1 (N0790141) Torch...

  • 1-Slot Quartz Torch for Optima 8x00

    Demountable design using one-piece quartz tubing for plasma and auxiliary gas flow. Available in a wide range of styles from 0-slot to 3-slot torches, depending on instrument and application needs. Torches without slots are recommended for organic solvents. 1-slot torches are the standard torch for...

  • Glass Baffled Cyclonic Spray Chamber for Avio 200/500

    This baffled cyclonic spray chamber, made of borosilicate glass, is an integral part of the sample introduction system responsible for filtering the sample mist to permit appropriate droplet size distribution to reach the plasma. The spray chamber features a sand-blasted neck with EZ seal fitting...

  • CTFE Liquid Fitting - male

    CTFE Liquid fitting - male with barb end

  • Torches and Components

    Agilent Technologies

    Comprised of three Concentric Quartz tubes through which streams of argon gas pass. Three streams = plasma, auxiliary, and nebulizer (carrier) gas. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies...

  • Rotary Pumps And Vacuum System Supplies

    The oil level on the pump should be checked every three months, when the plasma is ON Maintain the oil level between the Max and Min levels on the gauge Standard frequency for changing the oil is approximately every 4,500 hours Be careful when changing oil because the oil may have absorbed dangerous...

  • Adjustable Torch O-Ring Kit for Avio 200/500

    This kit includes: O-Ring 20.3 mm I.D., Qty. 2 (09902223) O-Ring 2.57 mm I.D., Qty. 2 (N0791334) Plastic O-Ring Removal Pick, Qty. 1 (09220410)

  • HiTrap Capto Core 400

    HiTrap columns prepacked with Capto Core 400 designed for intermediate purification and polishing of viruses and other large biomolecules. Novel core bead technology and multimodal ligand give Capto Core 400 dual functionality, size exclusion and binding chromatography, in one chromatography resin....

  • Concentric Glass Nebulizer, MEINHARD Type C

    The MEINHARD® concentric glass nebulizer reflects exacting standards in design and manufacturing. Its advantages include simplicity of design and operation, reproducible and self-aligning aerosol, and close fabrication control. For use with high dissolved solids solutions.

  • HiScreen MabSelect PrismA

    This column is prepacked with MabSelect PrismA protein A chromatographyn resin that has been improved with an optimized high-flow agarose base matrix and a genetically engineered protein A-derived ligand, allowing efficient cleaning between purification runs. Features Enhanced dynamic binding...

  • > Next

Compare Tool

Select up to 3 products