These general purpose 110 to 120V sewage ejector pumps remove sewage containing solids from drains where a gravity system won't work, such as in septic systems that are below the main sewer line. They are compatible with most standard U.S. residential electrical wall outlets.

The new family of BVC fluid aspiration systems are the first to account for the needs of a modern Biology laboratory. Three models: Basic, Control and Professional to serve your fluid aspiration needs Containment: 2 or 4 liter vessels for safe collection and disposal of your biological…

Maintained or momentary operation Hands-free operation Plugs directly into power source No adapters or special connections On/Off foot switches are compatible with selected dry vacuum pump models. Switches handle up to 15 amps. 1233K59 and 1233K60 comes with a 3-prong U.S.…

The lab filtration pump that transfers filtered liquids directly to waste Designed to improve operation time and comfort Simply connect the pump to your manifold or filtration apparatus and place the discard tubing to drain and you are ready to filter. There is no need to use additional…

A vacuum pump excellent for many laboratory fluid movement applications including vacuum filtration and solid phase extraction, as well as degassing, and evaporation of volatile solvents. Ultimate vacuum: 52Torr (70mbar) Free air capacity: 38 lpm (1.4cfm) Whisper Quiet. Operation at…

The RZ9 is part of the VACUUbr /AND® XS series of rotary vane vacuum pumps. These pumps have been designed from the ground up for best performance in laboratory applications. The RZ9 is an excellent choice for freeze dryers up to 10 liters, centrifugal concentrators or other low-temperature…

GoatThroat® Pumps work by pressurizing a container to dispense liquids with one touch, as easily as using a faucet. A few strokes of the piston can pressurize any container from 2-gallon jugs to 55-gallon drums. One-touch flow control dispenses liquids at a controlled rate to prevent…

The High Output Pump features a piston-driven design for greater power. The Chemical Duty Pump has a chemically-resistant head and diaphragm for use with corrosive chemicals and solvents. The High Output and Chemical Duty pumps can support high flow rates to decrease process filtration time.…

Service kits for VACUUBRAND® vacuum pumps. Due to the great variety of pumps, systems and service kits, it is highly recommended to consult your Operating Manual to select the proper kit prior to purchase.

The 300 series of interchangeable OEM pumpheads also includes the 304MC and 308MC microcassette pumpheads with a choice of four rollers for higher flow or eight rollers for higher precision. Microcassette pumpheads are available with three or 5 pumping channels.

The new MZ1C diaphragm pumps offer a compact, high performance and easy-to-use solution for many basic laboratory tasks, such as filtration, and smaller evaporative applications, such basic rotary evaporation, or small gel dryers. The functional, space saving and innovative design with readily…

5-pack AirChek ® XR5000 Pump Kit, high flow and low flow sampling, with five each: XR5000 pumps with high-power Li-Ion battery, filter cassette holders, adjustable low flow holders, constant pressure controllers, protective Type A tube covers, (1) five-station Multi-charger, 100-240V, and one…

VACUUBRAND MZ2C NT+2AK oil-free diaphragm vacuum pump provides powerful oil-free vacuum for applications that do not require control, such as vacuum ovens and gel dryers. Compact and whisper-quiet, it builds on the popular MZ2C NT diaphragm vacuum pump with inlet and outlet cachpots, which enhance…

Centrifugal Self-Priming Effluent Pump available with ½ hp or ¾ hp, cast iron casing, higher than NEMA service factor dual compartment motors, built-in check valve facilitates fast priming and guards against siphoning action. Self-priming effluent pumps designed for installations with septic tanks…

The PC201 NT dry vacuum system features the new MD4C NT vacuum pump to provide whisper-quiet vacuum with flow control and integrated solvent recovery accessories. A Bourdon (dial) vacuum gauge provides relative pressure readings and trend indication. It’s an excellent choice for basic rotary…

The Aeolus touch-screen vacuum controller displays and controls the process pressure in your system to automatically perform your process via two-point vacuum control. This dramatically reduces labor required to run processes such as ethanol evaporation or short past distillations. The controller…

A popular vacuum pump suitable for many laboratory tasks, vacuum filtration, degassing, solid phase extraction and many other tasks. Ultimate Vacuum: 52Torr (70mbar) Free Air Capacity: 73lpm (2.6cfm) Whisper Quiet. These vacuum pumps utilize diaphragm vacuum technology for…

Rotary Vane Vacuum Pump, 195 liters/minute displacement at 60 Hz. 1.3 x 10-4 mBar partial pressure. Direct-drive, two-stage, oil-sealed, sliding-vane. Includes on/off switch, inlet and outlet ports, mode selector (High Vacuum and High Throughput), gas-ballast control (Closed, Low Flow and High…

The Magma cart fillers feature a patented heating rod design for easier and more accurate dispensing. In as little as 3 minutes, heat up your product to a set temperature and maintain a constant temperature effectively. Safety: CE rated Features & Benefits: Typical filling…

 Measures in the rough/coarse vacuum range from atmosphere to 1 mBar/Torr/hPa with user selectable units.  Corrosion-resistant capacitive transducer provides accurate, absolute pressure measurement. Has digital display for precise readings, and quasi-analog display for trend indication.…

Masterflex pump is used with bioreactor or spinner flasks to add or withdraw fluids. It is small compact and stack-able power indicator. Includes pump head (7807-10000) and pump drive (7807-23005). Head accepts 13, 14, 16, 17, 18 and 25ft tubing. Specifications: Drive Enclosure Painted…

High Vacuum Tubing The Fischer Technical High Vacuum Tubing has an ID of 1/2" and can withstand 25 microns of pressure. High Vacuum Pump Oil Fischer Technical High Vacuum Pump Oil is available by the quart in packs of two or cases of twelve. High Vacuum Grease This vacuum…

This is a complete BestValueVac® vacuum chamber setup designed built and 100% tested in Chicago, Illinois. With our unique patent pending gasket design (Utility Patent #14/533,548) this chamber is sure to last 10,000 uses with proper care and maintenance. The gasket itself is reversible…

The VACUUBRAND RZ 2.5 is a high-performing rotary vane pump in a lightweight, telescopic design. Despite its small footprint, the large oil volume results in fewer oil change, conserving both time and money. For laboratory and process applications that demand a low ultimate vacuum at a medium gas…

Humboldt Aspirator Filter Pumps offer excellent performance for vacuum filtrations under both high and low water pressure conditions. The pumps feature a ball-type, positive-action valve in the suction tube which prevents water backflow if the pressure is reduced.

High flows from 5 to 15 L/min Achieve flow rates that you couldn’t reach before when using a personal sample pump. The Leland Legacy provides the high flows and long run times of a vacuum-style pump in a compact, portable, and battery-operated sampler.  Long runs for 24 hours…

SMF-010: EZ-Swap Vacuum Pump Exhaust Oil Mist Filter with KF25 Fittings Our new EZ-Swap series vacuum pump exhaust oil mist filter is re-designed to allow you to exam and replace filter element in a snap. Built-in observation window gives you easy visual access to filter element without opening…

The PerkinElmer bottle with a 2 Liter capacity is used in vacuum degassing system.

Designed specifically for non-corrosive, non-evaporative applications, the 70mbar, 38 lpm ME2 NT Aluminum-FKM diaphragm vacuum pump is an excellent choice for a wide range of laboratory and process plant vacuum applications. Eliminates Oil Changes These vacuum pumps utilize diaphragm…

The VACUUBRAND® VACUU•SELECT® complete vacuum controller provides the same intuitive touch screeen graphic interface as our PC 3001 VARIO® select, but equipped with a solenoid valve for use with conventional diaphragm pumps from any manufacturer.  The…

Little Giant® Aquarium series magnetic drive pumps are specifically designed for salt water and fresh water aquarium circulation and filtration applications.

Magnetically driven pumps for highly corrosive chemicals and solutions. The Little Giant® MD-CK series features leakproof, seal-less magnetic drives and are designed for in-line, non-submersed use. These pumps feature polyvinylidene fluoride, PTFE, carbon, ceramic and Fluoroelastomer (FKM) parts.