Electronically controlled and built to handle viscosities ranging from light watery solution to high viscosity fluid Totally enclosed, non-ventilated motor keeps corrosive fumes and dust out for a long and trouble-free service life Permanent-magnet, D.C. motor provides maximum constant torque…

The IKA C-Mag HS 7 control has a square top made of ceramic. It stirs volumes of up to 20L (H₂O) and runs at speeds ranging from 50-1500rpm. IKA’s stands strongly by its product and technology and is offering a lifetime warranty for this product – scientists can focus on…

Medium Duty, Model HST10 Totally enclosed, 1/17 hp, permanent magnet DC motor Direct-drive, with rpm/torque readout and X-Y output Maximum rpm: 2,500 Torque: 1.5 lbs.-in. (1.73 kg-cm) Direct drive provides 20 to 2,500 rpm and 1.5 lb.-in. torque. Available for 120 or 240 V, 50/60 Hz…

Use Thermo Scientific™ Cimarec™ i Bath Mounts with Telesystem series stirrers. Made of transparent acrylic Capacity: 3.9 gal. (15L) Temperature Range: 0 to 60°C Dimensions: 20.4 x 12.4 x 6.3 in. (520 x 315 x 160mm)

Economical Compact design Stirring range: 100-1600 rpm Rugged construction The unit’s 5” x 5” top size saves valuable bench space. Alternating current motor and strong magnet provide longer life and vigorous stirring. Top is constructed of plastic. Stirrer has a one-year…

Inert to corrosives Easy to clean Bendable into shapes These Saint-Gobain Chemware ® PTFE Fluoropolymer Stirring Rods contain a fully enclosed steel insert for stiffness, yet can bend into various shapes for use with powders. Heat resistant to 550° (288°C) and completely inert to highly…

Continuous shearing and blending action mixes with introducing air Corrosion-resistant stainless steel Teflon® TFE bushing 11,500 rpm 120V or 240V models available Includes lab clamp The upward flow stirrer may be used effectively with pharmaceuticals, cosmetics,…

Uniquely designed and lubricant free, these precision stirrer/stirring bearings are self-aligning. The saddle O-ring provides constant force and a positive seal on the stirring rod that allows vacuum operation to as low as 1mm. Ground finish rods from other manufacturers are not recommended for use…

Magnetic stirrer without heating. With ceramic set-up plate which offers excellent chemical resistance. Powerful motor for stirring quantities of: up to 5 l (H2O) MS 4; up to 10 l (H2O) MS 7; up to 15 l (H2O) MS 10 Elevated control panel for protection against leaking liquids

PTFE stirring blades for use with our button type 9524 and 9527 stirring shafts. Blades are 41mm wide x 12mm high and are designed for use in flasks 250ml and less. Match blade to shaft OD.

A superior, low melting, silicone base lubricant which liquefies at body temperature. Because of its composition, you need apply only a very thin film of Stir-Lube® to a stirring shaft to increase bearing and shaft life at least three times over that of a bearing lubricated with glycerine.…

Safe Operations Extremely resistant sealed case IP 54 Protection class is a guarantee of durability also when working in aggressive environment Full protection in case of overload, overtemperature and over current Lock key to prevent unintentional modification of the settings …

Shaft is precision ground and polished to fit our CG-2076 and CG-2077 10mm PTFE bearings. Designed to be used with cylindrical type reactors. The straight glass blades are spaced 90° apart and angled 15°.  PLEASE NOTE: STIRRER SHAFTS ARE DESIGNED FOR COUNTER-CLOCKWISE ROTATION.

Stirrer blade made of 1/8" thick solid PTFE for use with both Chem-Stir™ and button style stirring shafts having a 10mm OD.

Replacement components for CLS-1414 and CLS-1415 Spinner Flasks.The Complete Impeller Assembly consists of top cap, silicone liner, glass rod, compression fitting magnet holder, paddle and magnetic stir bar.

A 10mm precision ground and polished stirrer shaft for use with PTFE bearings and CG-2091 and CG-2092 PTFE agitators. Flat ground section extends half way up shaft and permits positive seating of the PTFE locking screws.

High viscosity agitator, made entirely of PTFE and glass filled PTFE, provides excellent stirring at the bottom of 2L through 20L reactors, especially when heavy slurries are being mixed. Agitator attaches to stir shaft by both a compression fitting and a glass filled PTFE safety pin. Heavy…

Polished glass stirring shafts, 10mm OD. Recommended for use with only our 8050,8066,13443 and 13445 bearings. Join 8083,8085,8086,8087,8096 blades to button type shafts. Join 8088, 8089, 8090 & 8091 agitators to bead type shafts. Plain shafts will accept 8094 & 8095 agitators secured with a…

The United Scientific™; Eco-Mix Vortex Mixer has a simple touch-and-go function that makes it easy to use. The compact design saves bench space, yet the mixer is powerful enough to deliver robust vortex mixing at 3000 rpm. Compatible with centrifuge tubes up to 50mL capacity, and can also be…

Thomas No. 1177M38 Impeller. Mixer. Blade. Crossed Blade. Radial Flow. High Speed. Low Viscosity. 316L SS. Electropolished. High Shear. High Vortexing. Thomas No. 1177M39 This radial flow impeller is effective for high speed, low viscosity mixing. The 50 mm (2”) diameter…

The VELP Telescopic H-Stand allows even heavy accessories to be lifted and lowered effortlessly. The stand has an adjustment handle to move the stirrer. The Telecopic H-Stand is compatible with all VELP Overhead Stirrers.

The Magnetic Induction Stirrer by Heathrow Scientific is motor-less, using advanced coil technology that produces the strongest magnetic coupling and has no moving parts making this unit 100% wear-free and maintenance free. Motor-less Magnetic Stirrer: The magnetic coil technology works on…

Glass bearing design for use with Ace-Thred pressure reactors and our 8075 glass, polished or 8074 bare, stainless steel 10mm stirring shafts. Both the top bushing and bottom coupling are PTFE. Maximum operating speed is 600 rpm.

Benchmark’s Overhead Stirrers feature advanced LCD controls for accurate display of both speed and run time. The stirrers include a support stand complete with mounting hardware.  The mixer is easily attached at the desired height for compatibility with a wide range of vessels (up to 24…

These Corning® stirrers have a durable glass-ceramic 4 x 5 inch Pyroceram® top and offer superior performance and reliability in a low profile, space-saving design. Exclusive closed-loop stirring control monitors and regulates the stirring speed for aqueous, viscous, or semi-solid solutions. A…

Impellers made of stainless steel (8592H39 through H48) or glass-filled propylene (8592H36) Autoclavable 8592H36 Lower Assembly/Shaft and Impeller; shaft length x diameter: 13-1/2" x 3/8"; impeller diameter: 4". 8592H39 Lower Assembly is for use with the Nalgene 30-gallon,…

Stirrer Blades PTFE construction Fit all standard shafts Will not scratch glassware Hole diameter: 6.5 mm Model 8596G58 to G70 shafts are for use with 8596G18 to G50 blades.

Caframo’s high torque stirrers are designed and engineered specifically to meet the continuous demands of heavy industrial use. The heart of the BDC line is the high performance Brushless Direct Current (BDC) motor. A unique two speed transmission provides incredible amounts of power. Caframo…

Universal Stirrer Shaft Coupling incorporates a universal joint to compensate for misalignment of drive motor and glass stirrer shaft. Nylon bushing compresses around shaft using an allen screw. Steel stud attaches directly to the chuck of a stirrer motor. Supplied complete with an allen wrench. …

Bell-ennium Magnetic Stirrers are designed for both cell cultures in Spinner flasks as well as for general laboratory procedures requiring the use of magnetic stirring equipment.  Bell-ennium stirrers offer the laboratory researcher a wide range of capabilities and the latest innovations in…

The stirrers are designed for optimal suspension cell culture and the use of microcarriers. The system comprises of a stirrer platform and a number of glass culture vessels. MCS-102L accommodates two 1 litre culture vessels Speed range from 0 to 80rpm Softstart/stop for slow…