The InLab® 605-ISM DO sensor incorporates polarographic dissolved oxygen determination technology. Produces high accuracy and reproducibility Designed for use with METTLER TOLEDO portable meter SevenGo Duo pro™ Membrane is protected by a steel mesh and the shaft is made out…

Backed by our commitment to accurate and precise measurement, the OHAUS Starter Series of electrodes are designed to produce exact results time and time again. The Starter Series includes pH, reference, oxidation-reduction potential (ORP), conductivity

Virtually eliminate fringe field interference errors with the advanced Thermo Scientific™ Orion™ DuraProbe™ 4-Electrode Conductivity Cells. Durable and extremely accurate under a wide range of conditions. 8-pin Mini-DIN 4 electrode graphite cell Rugged epoxy body …

Backed by our commitment to accurate and precise measurement, the OHAUS Starter Series of electrodes are designed to produce exact results time and time again. The Starter Series includes pH, reference, oxidation-reduction potential (ORP), conductivity

DuraProbe Conductivity Cells are durable and extremely accurate under a wide range of conditions Designed for high accuracy under demanding field and plant conditions Compensates for electrode fouling, cable/connector resistance and polarization errors A choice of glass/platinum, epoxy/graphite…

For field and lab applications Available in a variety of cell constants and materials for all applications DuraProbe™ 4-electrode cells or conventional 2-electrode cells Choose a cell made from materials that fit the application. Cells made from glass and platinum provide…

WTW offers decades of expertise in high quality, rugged conductivity cell technology, and now the new IDS conductivity cells build upon this proven technology including the automatic transfer of the cell constant feature to eliminate operation errors. Two models are available to cover the entire…

Wide conductivity range For lab and field applications Rugged epoxy/graphite MiniDIN connector DuraProbe 4-electrode cells provide the highest accuracy for demanding laboratory or field applications. The 4-electrode design compensates for electrode fouling, cable and connector…

IntelliCAL™ CDC401 is a digital, graphite, 4-pole conductivity probe. The standard version is available with a 3 or 1 m cable and is intended for laboratory use. The CDC401 is ideal for measuring electrical conductivity, salinity, resistivity, or total dissolved solids (TDS) in wastewater,…

Combined silver ring electrode for argentometric titrations. Titrations of halides, sulfides, hydrogen sulfide, mercaptans and cyanides in aqueous medium, examples: Salt content (rock salt, NaCl) in ketchup, food, vegetable juices Sulphide content of green and black liquor in the pulp…

Metal combination electrode, Glass shaft, platinum junction, electrolyte KCl 3 mol/l, Silamid®-reference system, sensor platinum pin 1 mm Ø, plug head, length 170 mm, 12 mm Ø, -5...+100 °C

The reference electrode is used as a pair with an indication electrode to make a measurement. All types supplied with a 30 in. lead. All reference half-cells have a universal reference pin connector.Help in selecting the correct electrode can be viewed at Electrode Selection GuideHints on Electrode…

RE-5B Ag/AgCl (3M KCl) Reference Electrode with Flexible Connector Legal Information: Product of Bioanalytical Systems, Inc.

The labForce® CC-04 Conductivity/Temp. Electrode/Tester/Sensor uses a unique BPB (Brush-resistant Platinum Black) conductivity sensor technology, ensuring a high accuracy in a wide range of conductivity measurement. The built-in thermistor tests temperature simultaneously and allows for auto…

Flow measuring cells by WTW for medium and high conductivity are suitable for extensive measuring series in the lab but also for the maintenance and measurement of cleaning solutions in special systems. Suitable for flow-through measurement in the lab For medium and high conductivity …

Flow vessels for WTW conductivity measuring cells are perfectly designed to perform measurements without the interference of carbon dioxide through the air or to examine the conductivity of solutions in closed circuits. Important: The overpressure in the system must not exceed 0.5 bar.

Everywhere you Measure InLab 738: A 4-pole conductivity probe with integrated temperature sensor and attached 1.8m cable. Recommended for general measurements in the field or factory. Nominal cell constant: 0.57/cm. InLab 738-10m: A 4-pole conductivity probe with integrated…

Threaded adapter for use with platinum or other electrodes that normally would be step sealed to glass. With threaded bushing and silicone rubber septum for sealing, the electrode may be adjusted for depth or removed if desired. Capillary of glass is 11/2-2mm with 76mm of stem for sealing to…

The Thermo Scientific Orion 9482BN Half-Cell Lead Electrode measures lead ions in aqueous solutions quickly, simply, accurately, and economically. Free-flowing Sure-Flow™ junction assures stable, drift-free potentials When conventional electrode junctions clog, the Sure-Flow™…

The Burrell KUP-L-WELD® II welder is a complete, easy-to-use, self-contained unit for the instantaneous welding of thermocouples. The KUP-L-WELD® II is recommended for welding 30- to 14-gauge constantan, platinum, platinum/rhodium, and iron constantan. Simply plug the unit's electric…

The two electrode cells are able to measure low, standard and high conductivity samples depending on the cell constant. Cells with a 0.1cm -1 cell constant are ideal for low ionic strength solutions, deionized water, and ultra pure water. Glass/platinum cells are the best for chemically reactive…

Autoranging meter offers 3 ranges of measurements from tap water to wastewater and any aqueous solution Units of measure include µS/cm, mS/cm, ppm, ppt, mg/L, and g/L Adjustable Conductivity to TDS ratio factor from 0.4 to 1.0 - conveniently calculates the TDS value Large 3-1/2 digit (2000…

Armings with protective baskets made of stainless steel or plastic to use TetraCon® conductivity measuring cells as well as CellOx® oxygen sensors. Protection of the sensors against damage Robust design Easy mounting

The labForce® CC-02 Conductivity Electrode is designed for high-range conductivity measurement (up to 2,000 MS/cm, K=10.0). Its unique sensor ring coated allows the electrode stable and accurate measurement in high range conductivity. The built-in thermistor tests temperature simultaneously and…

The labForce® CC-01 Conductivity/Temp. Electrode/Tester/Sensor uses a unique BPB (Brush-resistant Platinum Black) conductivity sensor technology, ensuring a high accuracy in a wide range of conductivity measurement. The built-in thermistor tests temperature simultaneously and allows for auto…

Conductivity cell with fixed cable, 4 pole cell, plastic shaft, cable with 8 pole plug, sensor material graphite, cell constant 0.475 cm-1, temp.-sensor NTC 30 kOhm, length 120 mm, 15.3 mm Ø, -5...+80°C

Originally designed for use in cooling tower applications, the CS8300 inline conductivity sensor package is an economical option for continuous monitoring of conductivity and total dissolved solids. Constructed in a CPVC body with graphite electrodes, this probe is ideally suited for industrial…

The Mettler Toledo temperature probe finds its usage in chemical laboratories and healthcare facilities to ensure the safety of the user. User-friendly design and the strong and efficient construction makes it a must to have at your disposal. Mettler products are intended for sale/shipment within…

Ions in Motion InLab 731: A 4-pole conductivity probe with integrated temperature sensor and attached cable. Ideal for general measurements in aqueous media. Nominal cell constant: 0.57/cm. InLab 731-2m: A 4-pole conductivity probe with integrated temperature sensor and attached…

Thomas No. Description K Value Unit 1200Q36 Epoxy bodied conductivity cell K= 1 470 1200Q37 Epoxy bodied conductivity cell K= 0.1 470 1200Q38 Epoxy bodied conductivity…

The labForce® CC-03 Conductivity Electrode (K=1.0) is designed for high-accuracy laboratory conductivity measurements. Its cavity structure and platinum chip sensor design enhance the accuracy and stability of conductivity measurement in the range of 0 to 200mS/cm. The glass body is resistant…

Our CS150 Contacting Conductivity Sensor delivers accurate, reliable measurements of conductivity and total dissolved solids (TDS).