DuraProbe Conductivity Cells are durable and extremely accurate under a wide range of conditions Designed for high accuracy under demanding field and plant conditions Compensates for electrode fouling, cable/connector resistance and polarization errors A choice of glass/platinum, epoxy/graphite…

Backed by our commitment to accurate and precise measurement, the OHAUS Starter Series of electrodes are designed to produce exact results time and time again. The Starter Series includes pH, reference, oxidation-reduction potential (ORP), conductivity

RE-5B Ag/AgCl (3M KCl) Reference Electrode with Flexible Connector Legal Information: Product of Bioanalytical Systems, Inc.

The two electrode cells are able to measure low, standard and high conductivity samples depending on the cell constant. Cells with a 0.1cm -1 cell constant are ideal for low ionic strength solutions, deionized water, and ultra pure water. Glass/platinum cells are the best for chemically reactive…

The InLab® 605-ISM DO sensor incorporates polarographic dissolved oxygen determination technology. Produces high accuracy and reproducibility Designed for use with METTLER TOLEDO portable meter SevenGo Duo pro™ Membrane is protected by a steel mesh and the shaft is made out…

Backed by our commitment to accurate and precise measurement, the OHAUS Starter Series of electrodes are designed to produce exact results time and time again. The Starter Series includes pH, reference, oxidation-reduction potential (ORP), conductivity

Everywhere you Measure InLab 738: A 4-pole conductivity probe with integrated temperature sensor and attached 1.8m cable. Recommended for general measurements in the field or factory. Nominal cell constant: 0.57/cm. InLab 738-10m: A 4-pole conductivity probe with integrated…

Our CS150 Contacting Conductivity Sensor delivers accurate, reliable measurements of conductivity and total dissolved solids (TDS).

The labForce® CC-03 Conductivity Electrode (K=1.0) is designed for high-accuracy laboratory conductivity measurements. Its cavity structure and platinum chip sensor design enhance the accuracy and stability of conductivity measurement in the range of 0 to 200mS/cm. The glass body is resistant…

Virtually eliminate fringe field interference errors with the advanced Thermo Scientific™ Orion™ DuraProbe™ 4-Electrode Conductivity Cells. Durable and extremely accurate under a wide range of conditions. 8-pin Mini-DIN 4 electrode graphite cell Rugged epoxy body …

Our TCS3020 Toroidal Conductivity Sensor (Inductive Conductivity Sensor) delivers the most reliable technology for monitoring conductivity and total dissolved solids (TDS). Unlike contacting conductivity sensors, the TCS3020 is resistant to fouling, coating, and corrosion, and is designed for…

WTW offers decades of expertise in high quality, rugged conductivity cell technology, and now the new IDS conductivity cells build upon this proven technology including the automatic transfer of the cell constant feature to eliminate operation errors. Two models are available to cover the entire…

Metal combination electrode for halogenide titrations, Glass shaft, platinum junction, electrolyte KNO3 2 mol/l + KCl 0.001 mol/l, Ag/AgCl-reference system, sensor silver cap 4 mm Ø, chlorinated, plug head, length 120 mm, 12 mm Ø, -5...+100 °C.

Metal combination electrode, Glass shaft, platinum junction, electrolyte KCl 3 mol/l, Silamid®-reference system, sensor platinum pin 1 mm Ø, plug head, length 170 mm, 12 mm Ø, -5...+100 °C

Thomas No. Description K Value Unit 1200Q36 Epoxy bodied conductivity cell K= 1 470 1200Q37 Epoxy bodied conductivity cell K= 0.1 470 1200Q38 Epoxy bodied conductivity…

Armings with protective baskets made of stainless steel or plastic to use TetraCon® conductivity measuring cells as well as CellOx® oxygen sensors. Protection of the sensors against damage Robust design Easy mounting

Ions in Motion InLab 731: A 4-pole conductivity probe with integrated temperature sensor and attached cable. Ideal for general measurements in aqueous media. Nominal cell constant: 0.57/cm. InLab 731-2m: A 4-pole conductivity probe with integrated temperature sensor and attached…

Flow vessels for WTW conductivity measuring cells are perfectly designed to perform measurements without the interference of carbon dioxide through the air or to examine the conductivity of solutions in closed circuits. Important: The overpressure in the system must not exceed 0.5 bar.

The labForce® CC-02 Conductivity Electrode is designed for high-range conductivity measurement (up to 2,000 MS/cm, K=10.0). Its unique sensor ring coated allows the electrode stable and accurate measurement in high range conductivity. The built-in thermistor tests temperature simultaneously and…

Conductivity measuring cells with graphite electrodes in two and four pin models for standard measurements in aqueous solutions in the field and in the lab No measuring errors due to cable, polarization effects or changes of the electrical edge field Highest precision and linearity …

Conductivity cell with fixed cable, 4 pole cell, plastic shaft, cable with 8 pole plug, sensor material graphite, cell constant 0.475 cm-1, temp.-sensor NTC 30 kOhm, length 120 mm, 15.3 mm Ø, -5...+80°C

The Mettler Toledo temperature probe finds its usage in chemical laboratories and healthcare facilities to ensure the safety of the user. User-friendly design and the strong and efficient construction makes it a must to have at your disposal. Mettler products are intended for sale/shipment within…

Wide conductivity range For lab and field applications Rugged epoxy/graphite MiniDIN connector DuraProbe 4-electrode cells provide the highest accuracy for demanding laboratory or field applications. The 4-electrode design compensates for electrode fouling, cable and connector…

The labForce® CC-01 Conductivity/Temp. Electrode/Tester/Sensor uses a unique BPB (Brush-resistant Platinum Black) conductivity sensor technology, ensuring a high accuracy in a wide range of conductivity measurement. The built-in thermistor tests temperature simultaneously and allows for auto…

The labForce® CC-04 Conductivity/Temp. Electrode/Tester/Sensor uses a unique BPB (Brush-resistant Platinum Black) conductivity sensor technology, ensuring a high accuracy in a wide range of conductivity measurement. The built-in thermistor tests temperature simultaneously and allows for auto…

Combined silver ring electrode for argentometric titrations. Titrations of halides, sulfides, hydrogen sulfide, mercaptans and cyanides in aqueous medium, examples: Salt content (rock salt, NaCl) in ketchup, food, vegetable juices Sulphide content of green and black liquor in the pulp…

Originally designed for use in cooling tower applications, the CS8300 inline conductivity sensor package is an economical option for continuous monitoring of conductivity and total dissolved solids. Constructed in a CPVC body with graphite electrodes, this probe is ideally suited for industrial…

Autoranging meter offers 3 ranges of measurements from tap water to wastewater and any aqueous solution Units of measure include µS/cm, mS/cm, ppm, ppt, mg/L, and g/L Adjustable Conductivity to TDS ratio factor from 0.4 to 1.0 - conveniently calculates the TDS value Large 3-1/2 digit (2000…

Threaded adapter for use with platinum or other electrodes that normally would be step sealed to glass. With threaded bushing and silicone rubber septum for sealing, the electrode may be adjusted for depth or removed if desired. Capillary of glass is 11/2-2mm with 76mm of stem for sealing to…

For field and lab applications Available in a variety of cell constants and materials for all applications DuraProbe™ 4-electrode cells or conventional 2-electrode cells Choose a cell made from materials that fit the application. Cells made from glass and platinum provide…

The Burrell KUP-L-WELD® II welder is a complete, easy-to-use, self-contained unit for the instantaneous welding of thermocouples. The KUP-L-WELD® II is recommended for welding 30- to 14-gauge constantan, platinum, platinum/rhodium, and iron constantan. Simply plug the unit's electric…

MPP IDS – the digital multi-parameters (up to three main parameters) depth probes with built-in depth measurement to use in profile measuring Depth measurement of pH, conductivity, dissolved oxygen, turbidity - up to three main parameters simultaneously, including depth and…