DuraProbe Conductivity Cells are durable and extremely accurate under a wide range of conditions Designed for high accuracy under demanding field and plant conditions Compensates for electrode fouling, cable/connector resistance and polarization errors A choice of glass/platinum, epoxy/graphite…

Wide conductivity range For lab and field applications Rugged epoxy/graphite MiniDIN connector DuraProbe 4-electrode cells provide the highest accuracy for demanding laboratory or field applications. The 4-electrode design compensates for electrode fouling, cable and connector…

Virtually eliminate fringe field interference errors with the advanced Thermo Scientific™ Orion™ DuraProbe™ 4-Electrode Conductivity Cells. Durable and extremely accurate under a wide range of conditions. 8-pin Mini-DIN 4 electrode graphite cell Rugged epoxy body …

IntelliCAL™ CDC401 is a digital, graphite, 4-pole conductivity probe. The standard version is available with a 3 or 1 m cable and is intended for laboratory use. The CDC401 is ideal for measuring electrical conductivity, salinity, resistivity, or total dissolved solids (TDS) in wastewater,…

Backed by our commitment to accurate and precise measurement, the OHAUS Starter Series of electrodes are designed to produce exact results time and time again. The Starter Series includes pH, reference, oxidation-reduction potential (ORP), conductivity

The two electrode cells are able to measure low, standard and high conductivity samples depending on the cell constant. Cells with a 0.1cm -1 cell constant are ideal for low ionic strength solutions, deionized water, and ultra pure water. Glass/platinum cells are the best for chemically reactive…

Threaded adapter for use with platinum or other electrodes that normally would be step sealed to glass. With threaded bushing and silicone rubber septum for sealing, the electrode may be adjusted for depth or removed if desired. Capillary of glass is 11/2-2mm with 76mm of stem for sealing to…

Everywhere you Measure InLab 738: A 4-pole conductivity probe with integrated temperature sensor and attached 1.8m cable. Recommended for general measurements in the field or factory. Nominal cell constant: 0.57/cm. InLab 738-10m: A 4-pole conductivity probe with integrated…

Our TCS3020 Toroidal Conductivity Sensor (Inductive Conductivity Sensor) delivers the most reliable technology for monitoring conductivity and total dissolved solids (TDS). Unlike contacting conductivity sensors, the TCS3020 is resistant to fouling, coating, and corrosion, and is designed for…

WTW offers decades of expertise in high quality, rugged conductivity cell technology, and now the new IDS conductivity cells build upon this proven technology including the automatic transfer of the cell constant feature to eliminate operation errors. Two models are available to cover the entire…

Autoranging meter offers 3 ranges of measurements from tap water to wastewater and any aqueous solution Units of measure include µS/cm, mS/cm, ppm, ppt, mg/L, and g/L Adjustable Conductivity to TDS ratio factor from 0.4 to 1.0 - conveniently calculates the TDS value Large 3-1/2 digit (2000…

Conductivity measuring cells with graphite electrodes in two and four pin models for standard measurements in aqueous solutions in the field and in the lab No measuring errors due to cable, polarization effects or changes of the electrical edge field Highest precision and linearity …

Flow vessels for WTW conductivity measuring cells are perfectly designed to perform measurements without the interference of carbon dioxide through the air or to examine the conductivity of solutions in closed circuits. Important: The overpressure in the system must not exceed 0.5 bar.

Metal combination electrode for halogenide titrations, Glass shaft, platinum junction, electrolyte KNO3 2 mol/l + KCl 0.001 mol/l, Ag/AgCl-reference system, sensor silver cap 4 mm Ø, chlorinated, plug head, length 120 mm, 12 mm Ø, -5...+100 °C.

The labForce® CC-02 Conductivity Electrode is designed for high-range conductivity measurement (up to 2,000 MS/cm, K=10.0). Its unique sensor ring coated allows the electrode stable and accurate measurement in high range conductivity. The built-in thermistor tests temperature simultaneously and…

Metal combination electrode, Glass shaft, platinum junction, electrolyte KCl 3 mol/l, Silamid®-reference system, sensor platinum pin 1 mm Ø, plug head, length 170 mm, 12 mm Ø, -5...+100 °C

Our CS150 Contacting Conductivity Sensor delivers accurate, reliable measurements of conductivity and total dissolved solids (TDS).

The Mettler Toledo temperature probe finds its usage in chemical laboratories and healthcare facilities to ensure the safety of the user. User-friendly design and the strong and efficient construction makes it a must to have at your disposal. Mettler products are intended for sale/shipment within…

The labForce® CC-04 Conductivity/Temp. Electrode/Tester/Sensor uses a unique BPB (Brush-resistant Platinum Black) conductivity sensor technology, ensuring a high accuracy in a wide range of conductivity measurement. The built-in thermistor tests temperature simultaneously and allows for auto…

RE-5B Ag/AgCl (3M KCl) Reference Electrode with Flexible Connector Legal Information: Product of Bioanalytical Systems, Inc.

MPP IDS – the digital multi-parameters (up to three main parameters) depth probes with built-in depth measurement to use in profile measuring Depth measurement of pH, conductivity, dissolved oxygen, turbidity - up to three main parameters simultaneously, including depth and…

Combined silver ring electrode for argentometric titrations. Titrations of halides, sulfides, hydrogen sulfide, mercaptans and cyanides in aqueous medium, examples: Salt content (rock salt, NaCl) in ketchup, food, vegetable juices Sulphide content of green and black liquor in the pulp…

The Burrell KUP-L-WELD® II welder is a complete, easy-to-use, self-contained unit for the instantaneous welding of thermocouples. The KUP-L-WELD® II is recommended for welding 30- to 14-gauge constantan, platinum, platinum/rhodium, and iron constantan. Simply plug the unit's electric…

For field and lab applications Available in a variety of cell constants and materials for all applications DuraProbe™ 4-electrode cells or conventional 2-electrode cells Choose a cell made from materials that fit the application. Cells made from glass and platinum provide…

Flow measuring cells by WTW for medium and high conductivity are suitable for extensive measuring series in the lab but also for the maintenance and measurement of cleaning solutions in special systems. Suitable for flow-through measurement in the lab For medium and high conductivity …

The reference electrode is used as a pair with an indication electrode to make a measurement. All types supplied with a 30 in. lead. All reference half-cells have a universal reference pin connector.Help in selecting the correct electrode can be viewed at Electrode Selection GuideHints on Electrode…

The CS200TC conductivity probes are a cost effective solution for measuring conductivity in light industrial and laboratory applications. The CS200TC features platinized measuring surfaces that provide accurate and repeatable measurements. Rugged epoxy bodies make the sensors virtually unbreakable.…

Backed by our commitment to accurate and precise measurement, the OHAUS Starter Series of electrodes are designed to produce exact results time and time again. The Starter Series includes pH, reference, oxidation-reduction potential (ORP), conductivity

Originally designed for use in cooling tower applications, the CS8300 inline conductivity sensor package is an economical option for continuous monitoring of conductivity and total dissolved solids. Constructed in a CPVC body with graphite electrodes, this probe is ideally suited for industrial…

The InLab® 605-ISM DO sensor incorporates polarographic dissolved oxygen determination technology. Produces high accuracy and reproducibility Designed for use with METTLER TOLEDO portable meter SevenGo Duo pro™ Membrane is protected by a steel mesh and the shaft is made out…

Conductivity cell with fixed cable, 4 pole cell, plastic shaft, cable with 8 pole plug, sensor material graphite, cell constant 0.475 cm-1, temp.-sensor NTC 30 kOhm, length 120 mm, 15.3 mm Ø, -5...+80°C

Ions in Motion InLab 731: A 4-pole conductivity probe with integrated temperature sensor and attached cable. Ideal for general measurements in aqueous media. Nominal cell constant: 0.57/cm. InLab 731-2m: A 4-pole conductivity probe with integrated temperature sensor and attached…