Chromatography Sample Preparation
-
Field duplicates of canister samples frequently result in analyte concentrations with high relative standard deviations. In addition, field duplicates do not differentiate laboratory performance from sampling variability. Restek’s dual canister sampling manifold (DCSM) minimizes sampling…
-
Great value and improved design Eliminates the need for the adaptor fitting on the static and purge valves
-
QuEChERS methods are fast, easy, and cost-effective, and Restek Q-sep products make QuEChERS procedures even simpler. All extraction salts, sorbents, and sample tubes are included—no specialized equipment or glassware is required. Prepare samples more efficiently with a complete line of…
-
New personal air sampling technology designed to meet OSHA and NIOSH requirements for industrial hygiene applications Quiet, robust sampler does not require a pump and manages variations in face velocity, temperature, and humidity better than traditional sampling approaches Easy to…
-
Ashcroft Test Gauges
RestekHigh-accuracy test gauges are recommended for verifying the vacuum/pressure in canisters before and after sampling. The 6-inch face on the analog gauge allows for easy reading. The digital gauge operates on two AAA batteries and offers an unambiguous readout. Both gauges have an accuracy of +/–…
-
Robust, low-flow pump optimized for sampling volatile organic compounds (VOCs) onto thermal desorption (TD) sorbent tubes Small, lightweight, easy to use, and intrinsically safe—ideal for personal monitoring and a wide range of other air and gas sampling applications Compatible with any…
-
Celite 503
MilliporeSigmaCAS No.: 68855-54-9 pH: 10 (100 g/l, H2O, 20°C) Solubility: Bulk Density: 300 kg/m3
-
Swagelok sample cylinders are made of 304L and 316L stainless steel to resist corrosion and DOT rated to 1,800 and 5,000 psig (TPED cylinders rated to 1,450 and 4,350 psig), which allows sampling at gas wellheads as well as on-site refineries. Each cylinder is hydrostatically tested to at least 5/3…
-
47 mm glass fiber disks embedded with specialty bonded silica Meet requirements for EPA Method 1664.* Reduce emulsion formation and amount of solvent required by previous EPA methods No chlorofluorocarbons needed *A sodium sulfate drying tube (cat.# 26207) and a 0.45 µm PTFE…
-
Mini-Can Accessories
RestekThese accessories enhance mini-can usage and provide flexibility in their application, from personal, to area, to vapor intrusion sampling. Sampling Belt: Adjustable up to 50" Two reclosable hook-and-loop straps securely hold mini-can or other sampling device Straps slide…
-
Attach quick-connect body fitting to stem fitting to open canister. Attach quick-connect stem protector to stem fitting when not sampling to prevent canister from accidentally opening. Connection: 1/4" tube fitting. Note: Quick-connect body fitting (cat.# 24187) must be ordered separately…
-
Chromatographic Spray
Ace GlassDelivers a true aerosol with no droplets. Enables thorough brushing for uniform development. Spray action begins at .028m3 per minute air flow. Atomization rate approximately 10cc per minute. Easily controlled with thumb pressure on vent hole. Suction stem is 125mm long.
-
Restek's passive air sampling kit incorporates all the hardware necessary to collect air samples and is easy to assemble for field sampling.* The improved filter design greatly reduces the number of potential leak sites. The passive air sampling kit is available in seven sampling flow ranges and…
-
The Restek accessories are compatible to use with Resprep SPE tubes and have a strong polypropylene material that offers great strength and durability.
-
0–300 psig inlet pressure range 0–15 psig outlet pressure range Supplied with 0–15 psig outlet pressure gauge, brass CGA 170 nut and nipple, and 1/8-inch compression outlet
-
Hydrophilic (polar) adsorbents used to extract hydrophilic analytes from nonpolar matrices, such as organic solvents (e.g., polar contaminants from sample extracts). All cartridges are manufactured using high density polypropylene and have polyethylene frits unless otherwise noted. …
-
Accurately and precisely dispense liquids for QuEChERS extractions with this versatile pump. A quick, simple adjustment lets you set the output volume anywhere from 2.5 mL to 30 mL per stroke, and the included adaptors will accommodate most reagent bottles. Adjustment knob offers 56 output…
-
Convenient, multiple adsorbent beds in a single cartridge For use in multiresidue pesticide analysis to remove matrix interferences Excellent for cleanup of dietary supplement extracts
-
Ottawa Sand (Bulk Adsorbent)
RestekOttawa sand is listed in several U.S. EPA methods as the specified medium for matrix spike and laboratory control blanks. Sample medium for matrix spikes and laboratory control blanks Packaged in convenient 5 kg buckets
-
Use the Resprep sample delivery system to transfer large volumes of low viscosity samples directly from a bottle to a solid phase extraction cartridge, or to a disk on a vacuum manifold system for extraction or cleanup. Each unit consists of six transfer lines with a stainless steel weight on one…
-
Air Canister Tripod
RestekRestek’s air canister tripod holds two canisters simultaneously for collocated ambient air sampling. The custom-designed bracket holds most 1, 3, and 6L canisters* securely without any tools. Lightweight (12 lb) and compact for easy storage and transport Extends from 6' to 9'…
-
Tedlar Sampling Bags
RestekSampling bags are a low-cost, whole-air sampling device for high-level VOCs and permanent gases. Several EPA, NIOSH, and OSHA methods exist for bag sampling for a variety of applications: stationary sources emissions; workplace atmospheres; ambient, indoor air quality; and breath analysis. Choose…
-
Sample Cylinder Valves
RestekAlta-Robbins' unique valve design incorporates a fully contained soft seat that provides durability and longer lifetime. Tight shut-off is easily achieved with very low torque, yet the valve is rugged enough to withstand overtightening. Multiple valve configurations are available for both…
-
Swagelok sample cylinders are made of 304L and 316L stainless steel to resist corrosion and DOT rated to 1,800 and 5,000 psig (TPED cylinders rated to 1,450 and 4,350 psig), which allows sampling at gas wellheads as well as on-site refineries. Each cylinder is hydrostatically tested to at least 5/3…
-
Celite 545 Particle Size 0.02-0.1 mm
MilliporeSigmaCAS No.: 68855-54-9 pH: 10 (100 g/l, H2O, 20°C) Solubility: Bulk Density: 300 kg/m3
-
Silica Gel 60 (230-400 Mesh) 25 Kg Silicar
Avantor - Macron Fine Chemicals™For Column Chromatography Grade: SilicAR CAS Number: 63231-67-4 HTS Number: 2811221000 Specific Gravity: 1L = 2.10 Kg Management of Change: N
-
These cartridges have been specifically designed to provide consistent and reproducible results for the method or application stated. All cartridges are manufactured using high density polypropylene and have polyethylene frits unless otherwise noted. Cartridges may be processed by any one or…
-
Can be used for internal or external retaining rings Works to remove retaining ring in all ASE cell caps
-
Use the CGA-160 inlet connection with 14L Scott/Air Liquide transportable gases. Use the CGA-165 inlet connection with 48L Scott/Air Liquide transportable gases.
-
Sampling bags are a low-cost whole air sampling device for high level VOCs and permanent gases. Several EPA, NIOSH, and OSHA methods exist for bag sampling for a variety of applications: stationary sources emissions; workplace atmospheres; ambient, indoor air quality; and breath analysis. Choose…
-
For ultimate inertness, SilcoCan air sampling canisters feature our unique Siltek treatment technology. Even highly active components, at low parts-per-billion concentrations, can be readily sampled and stored without loss. The RAVE valve is a high-quality, metal-to-metal seal, 2/3-turn valve with…