Chromatography Sample Preparation
-
Use with 1, 3, or 6 L canisters for grab air sampling Variety of orifice sizes for fast sampling from 5 to 60 minutes Connect 1/4" compression fitting directly to canister valve inlet Replaceable frit protects orifice and valve from particulates Sample inlet design minimizes water…
-
This unique grab sampler is specifically designed for soil gas sampling by allowing the connection of tubing coming from the soil gas sample port. The innovative design minimizes connections and leaks and houses a critical orifice in the tee fitting. It also incorporates a vacuum gauge and 2…
-
Accelerated solvent extraction is a common technique for fast and reliable extraction of organic materials from solid matrices, using EPA SW-846 Method 3545, Pressurized Fluid Extraction (PFE). Restek offers a wide range of replacement parts to keep your extraction system running smoothly. All…
-
For ultimate inertness, SilcoCan air sampling canisters feature our unique Siltek treatment technology. Even highly active components, at low parts-per-billion concentrations, can be readily sampled and stored without loss. The RAVE valve is a high-quality, metal-to-metal seal, 2/3-turn valve with…
-
1/4” Diaphragm Valves, RAVE+
RestekExclusive polymer-free construction means no sample contamination from off-gassing or target compound loss due to adsorption. Durable, roller-hardened valve port threads provide superior performance—and every valve is helium leak tested to 1x10 -6 mL/sec. Rugged, work-hardened, proprietary,…
-
Automated, in-line sample extract cleanup dramatically reduces sample preparation time. Simultaneous analysis and ILSP cartridge wash eliminate downtime between samples. Fast, simple alternative to QuEChERS or SPE for multiresidue pesticides analysis in foods. Minimizes money spent on…
-
Hydrophobic (nonpolar) silica-based adsorbents; used to extract hydrophobic analytes from polar matrices, such as water (e.g., pesticides from water). All cartridges are manufactured using high density polypropylene and have polyethylene frits unless otherwise noted. Cartridges may be…
-
CAS No.: 68855-54-9 pH: 10 (100 g/l, H2O, 20°C) Solubility: Bulk Density: 300 kg/m3
-
47 mm glass fiber disks embedded with specialty bonded silica Meet requirements for EPA Method 1664.* Reduce emulsion formation and amount of solvent required by previous EPA methods No chlorofluorocarbons needed *A sodium sulfate drying tube (cat.# 26207) and a 0.45 µm PTFE…
-
The Restek accessories are compatible to use with Resprep SPE tubes and have a strong polypropylene material that offers great strength and durability.
-
Proven long life—durable design is engineered to exceed 15,000 cycles Leak-free performance—every valve is helium leak-tested to 1x10 -6 mL/sec Effortless operation—easily finger-turn to achieve full valve closure (only 10 in-lb) Enhanced damage-resistance—W-type…
-
Restek's passive air sampling kit incorporates all the hardware necessary to collect air samples and is easy to assemble for field sampling.* The improved filter design greatly reduces the number of potential leak sites. The passive air sampling kit is available in seven sampling flow ranges and…
-
Resprep SPE Flow Filters
RestekDesigned specifically to improve flow when filtering oil and grease samples Use with Resprep Diskcover-47 reservoir, or any 47 mm glass sample reservoir
-
Rocker Vacuum Pumps
RestekOil-free vacuum pumps are piston powered, so they do not pollute the air and require minimal maintenance Quiet, low-vibration units keep disturbances to a minimum Built-in thermal protector automatically shuts off pump if it overheats and then restarts it once the unit is cool Inlet filter…
-
The Restek Cleaned Polyurethane Foam (PUF) Cartridges offers the following features: Use for collection of semivolatiles (pesticides, PCBs, PAHs) Both large high-volume (220–280 L/min) and small low-volume (1–5 L/min) PUFs available Suitable for ambient, indoor, and industrial hygiene…
-
Metering Control Valves
RestekReduces pressure between sample cylinder and GC injector Maintains fine metering control Contains Kel-F seat
-
-
Silica Gel 60 (230-400 Mesh) 25 Kg Silicar
Avantor - Macron Fine Chemicals™For Column Chromatography Grade: SilicAR CAS Number: 63231-67-4 HTS Number: 2811221000 Specific Gravity: 1L = 2.10 Kg Management of Change: N
-
Extrelut Nt Refill Pack For Column Fillings Extrelut Nt 20
MilliporeSigmaCAS No.: 68855-54-9 pH: 10 (100 g/l, H2O, 20°C) Solubility: Bulk Density: 300 kg/m3
-
Cleaned, assembled, and ready to use Clear or amber glass Caps and PTFE-lined septa included
-
Celite 503
MilliporeSigmaCAS No.: 68855-54-9 pH: 10 (100 g/l, H2O, 20°C) Solubility: Bulk Density: 300 kg/m3
-
Humidification Chamber
RestekWhen cleaning SilcoCan or TO-Can canisters, it is important to use humidified air or nitrogen to help remove volatile organic contaminants. Restek's humidification chamber is made of acrylic and withstands pressure up to 90 psi. The 1/4-inch inlet and outlet compression fittings allow easy…
-
ALTEF Gas Sampling Bags
RestekSampling bags are a low-cost whole air sampling device for high level VOCs and permanent gases. Several EPA, NIOSH, and OSHA methods exist for bag sampling for a variety of applications: stationary sources emissions; workplace atmospheres; ambient, indoor air quality; and breath analysis. Choose…
-
These small canisters are designed for controlled sampling, such as personal air sampling, as an alternative to tube and pump samplers. The 1,000 cc canister is suitable for sampling volatile organic compounds in air according to methods TO-14A, TO-15, IP-1A, ASTM 5466, OSHA PV 2120, and NJ DEP Low…
-
Large Volume SPE Reservoir
MilliporeSigmaRetention Mechanisms: Lipid matrix is retained via normal phase, hydrophobic, and Lewis acid-Lewis base interactions Sample Matrix Compatibility: Oils Dual layer SPE that contains both LC-Florisil® (upper layer) and Z-Sep/C18 (lower layer) SPE sorbents, separated by a PE frit …
-
Anhydrous sodium sulfate is the most common drying agent used to remove moisture from sample extracts. We package our 10-60 mesh material in recloseable buckets. Ideal for removing water from sample extracts Activate by heating to 400°C for four hours before use Packaged in…
-
Ultra-Clean Resin
RestekEquivalent to XAD-2 Resin—Exclusively from Restek! Ultra-Clean resin typically eliminates the hassle of cleaning and testing resin for air sampling. For adsorbing semivolatiles in air. Cleaned and GC tested. Available in 100 gram quantities.
-
Sampling bags are a low-cost whole air sampling device for high level VOCs and permanent gases. Several EPA, NIOSH, and OSHA methods exist for bag sampling for a variety of applications: stationary sources emissions; workplace atmospheres; ambient, indoor air quality; and breath analysis. Choose…
-
Allows switching from pressure to vacuum in a matter of seconds. Quiet, oil-free unit will not contaminate the extraction system or your samples. Provides 20" Hg (68 kPa) vacuum or 18 psi (124 kPa) pressure. Not recommended for use with 24-port manifold. Warranty period is one year from…
-
These cartridges have been specifically designed to provide consistent and reproducible results for the method or application stated. All cartridges are manufactured using high density polypropylene and have polyethylene frits unless otherwise noted. Cartridges may be processed by any one or…
-
Resprep® vacuum manifolds for SPE sample preparation, filtration, and elution are available in 12- and 24-port configurations. These manifolds help in achieving consistent extraction and filtration results. Multiple sample processing with these manifolds simplifies procedures and saves time. The…
-
0–300 psig inlet pressure range 0–15 psig outlet pressure range Supplied with 0–15 psig outlet pressure gauge, brass CGA 170 nut and nipple, and 1/8-inch compression outlet