Polycarbonate Box, 25 cell mini box features: Drain slots for LN2 drainage, Lift-off lid, Printed numbered grid on lid for ease of inventorying and organizing samples Fiberboard boxes with grids and dividers, 25 cell mini box, features: Drain slots for LN2 drainage Printed alignment arrows,…

Matrix: 75 Cst Oil Volume: 500 mL

SPME Arrows are the next-generation improvement of SPME fibers and can be used for headspace analysis or by immersion in a liquid to concentrate analyte on the Arrow. Available with a variety of polymer coatings, SPME Arrows have demonstrated up to 10 times the sensitivity of traditional SPME…

Nebulizers are a critical part of the Flame AA sample introduction system. Agilent nebulizers for PerkinElmer AA instruments are designed to support a variety of samples and provide the best precision, efficient drainage, minimal burner blockage, and reduced interferences. Application: For Aqueous…

1. 6mm ID Sample Loop, Teflon, 500µL, connects to ports, #1 and #4 SC-FAST high-flow (-28 fittings, 3. 2mm OD x 1. 6mm ID tubing).

Dissolution baskets are cylindrical baskets that contain dosage forms and are placed at the end of the rotating shafts for dissolution apparatus 1 or reciprocating apparatus 7 holders. Agilent offers dissolution apparatus baskets that are constructed from non-reactive mesh to ensure accuracy of…

The Agilent Technologies drying tube is suitable for use with Cetac 470419, sp5557 and Hg analyzer. Application: For Cetac 470419, sp5557, Hg Analyzer This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Dissolution vessels are used to hold dissolution media during drug release. Agilent provides a variety of dissolution vessels for use with Agilent dissolution apparatus. Selected verified vessels are available containing a Certificate of Conformance (COC). TruAlign vessels for the 708-DS are…

Silica-free, bonded polymeric material—no unwanted secondary silica interactions, even with basic compounds. High surface area—higher loading capacity compared to silica-based sorbents. Stable over a wide pH range (0–14)—won’t hydrolyze under extreme conditions. …

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent also offers a ?non-compendial? transdermal patch holder system as an alternative to the traditional Apparatus 5 assembly. Also made of stainless steel, the O-ring assembly eliminates the need for adhesives to hold the patch. This product is only available to U.S. Domestic Customers. …

Cannula extension kit, 500 mL (for use with one 4.5 in cannula). This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

SAMPLE-DMA8000 HDPE TEST (SET 5)

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent 96- and 384-well high binding microplates have high binding surfaces that bind medium and large biomolecules (greater than 10 kDa) that have hydrophobic and/or ionic groups. These microplates are recommended for the Cary Eclipse Fluorescence Microplate Reader Accessory. They are available…

The Agilent Technologies 1B connector with nipples is compatible to use with 2.4 to 3.2 mm OD tubing. Application: For 2.4 to 3.2 mm id Tubes, for FIMS-100, FIMS-400, FIAS-100, or FIAS-400, PerkinElmer FIMS/FIAS This product is only available to U.S. Domestic Customers. For research use…

Solid phase microextraction (SPME) is a technique for extracting analytes from solid, liquid, or gaseous samples by adsorbing them onto the SPME fiber and then desorbing them into an inlet, either on a gas chromatograph (GC) or an HPLC system. SPME is amenable to automation using an autosampler or…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Ideal for a variety of analyses, this single quadrupole detector brings the unsurpassed sample insight of mass spectrometry to liquid chromatography applications. The Flexar SQ 300 MS ™ is an integral part of the powerful and exible Flexar LC product line. It features a revolutionary…

Sapphire injector HF-resistant Size: 1.8 mm

In paddle dissolution method, dissolution paddles are attached vertically at the end of a rotating shaft to release the active pharmaceutical ingredient from the dosage form inside the holding vessel. Agilent dissolution rotating paddles are compatible with both apparatus 2 and apparatus 5 methods.…

Rotating cylinder with lower interchangeable spin on/off shaft, includes certificate. Apparatus 6, requires upper receptor shaft PN 14-3613. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent tubing and tubing assemblies are fully compatible with your PerkinElmer FIMS/FIAS systems, so you can be confident that they will integrate seamlessly with your PerkinElmer system. Application: Sample tubing, For FIMS-100, FIMS-400, FIAS-100, or FIAS-400, PerkinElmer This product is only…

Dissolution vessels are used to hold dissolution media during drug release. Agilent provides a variety of dissolution vessels for use with Agilent dissolution apparatus. Selected verified vessels are available containing a Certificate of Conformance (COC). TruCenter and EaseAlign vessels are…

Captiva syringe filters offer the industry's highest flow rates and loading capacities. Using Captiva syringe filters also significantly extends column lifetime. Choose from a variety of membrane types and pore sizes to prepare small-volume samples for High-Performance Liquid Chromatography (HPLC)…

The Agilent Technologies adapter is made from strong and sturdy metal that offers good corrosion resistance thus enhancing the durability. This fitting provides a secure connection forming a leak-proof seal. This product is only available to U.S. Domestic Customers. For research use only,…

The Agilent Technologies tool-to-disassemble disk assembly, with a 32 mm opening and a 40 mesh screen, is compatible to use with 12-4200 dissolution apparatus. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.