3M™ Sponge-Sticks are available in wet or dry formats, with and without gloves, to fit many applications. The 1.5" x 3" 3M Sponge-Stick allows sampling without directly handling the sponge. Stick-mounted sponge design allows the ability to access hard to reach areas without…

This hand controlled tool allows users to take liquid samples at specific depths. Simply place thumb over top hole, insert to desired depth, remove thumb to allow liquid to enter the tube, place thumb back over tube to prevent liquid from moving in or out, and remove. Polyethylene plastic…

Translucent polypropylene tubes, 17 mm x 100 mm, are designed to provide excellent chemical resistance.

Gilson Spinning Riffler, w/ Collection Unit & Hopper Custom touch screen controls rotation speed and vibration level Spin riffling is the method of choice for sampling accuracy and reliability of the highest order with dry materials. Gilson’s expertise in sampling and analyses of powders…

ViscoSampler with powerful suction for viscous media. The media is drawn up and discharged using the suction flask. Made of ultra-pure, chemically inert PTFE/FEP for contamination-free sampling. Specially developed for viscous substances such as slurries, silt, wet clay and soil samples, soil…

Taking samples from sacks, boxes, bags, etc. with sampling lances is a common and time-proven practice. This produces holes through which easily flowing bulk goods could escape from the container. With the close-it seal, this can be prevented in an uncomplicated manner. close-it has been…

For dipping bottles and immersion cylinders, matching manually-operated drum reels made of various materials. Tensile load max. up to 10 kg.

Internal Standard addition tee, used with ST nebulizer 0.15

For easy sampling from tanks, vats, lakes, etc., these high-density polyethylene plastic dippers will not rust or corrode, provide excellent chemical resistance and float, “just in case.” Handles are 2.9cm (1-1/8”) in diameter and welded to a rigid sampling bowl at a…

Designed for use with free flowing powders, granules and grains. The Powder Max enables large samples to be quickly and easily taken from drums, kegs, sacks etc… Key Features: Made from high quality 316L stainless steel. Satin finish Large 150ml sample size …

This sample scoop has been developed in order to meet the high requirements of the pharmaceutical industry, such as those contained in the FDA regulations. Like all samplers for the pharmaceutical industry, they are made of stainless steel AISI 316 without edges, crevices or undercuts in which…

High-quality 316L stainless steel (SS) scoops with no dead spaces or crevices Smooth, mirror polish surface—better than 0.5 µm Ra is ideal for powders and granules Heavy gauge 316L SS offers excellent corrosion resistance and strength BSE/TSE free These easy-to-clean 316L SS…

The Titan MPS™ digestion vessels cap consists of a DPC pressure sensor and can be used with 16-position microwave sample preparations. TFM construction of the cap ensures durability.

Universal powder and granules sampler made of stainless steel AISI 316L (1.4404). Developed initially for milk powder samples, conforms to standards of DIN and IDF (International Dairy Federation). The collector is inserted into bags or casks and the sample is removed using a semi-circular profile…

Unique spatula both scoops material and instantly displays weight. Balance with digital display is located in the easy-grip handle. The weighing range is 0 to 300.0 grams and 0 to 10.580 ounces. Readability is 0.1 gram and 0.005 ounce. Level position repeatability is 0.1 gram and accuracy is…

These sterile Jumbo Pipettes are ideal for sampling from narrow- or wide-mouth containers up to 208-liter (55 Gallon) drums. Reaches into container while keeping hand clear of contents Diameter allows for use through drum bunghole or other small openings Color-coded end helps prevent…

The SteriWare™ Disposable Mono Slot Sampler is ideal for taking a single sample from free flowing powders and granules. The Mono Slot Sampler is designed to take a 50ml sample from the sampling slot positioned near the tip of the sampler. Key Features: Assembled & packed in a…

Snap-on lid safely contains samples Ideal for use in multi-zone cleanrooms FDA-grade material; safe for food, drug, and cosmetic contact Gamma irradiated sterile These sterile polystyrene (PS) sampling scoops feature a snap-on lid allowing you to use them as a container for safely…

Single tube vacuum manifold with #15 o-ring connections on ends. Available in either 3 or 4 port configuration with 0-10 Easy Action stopcocks. Order with either 14/20, 24/40 inner joints or #15 o-ring joints on ports. Distance between ports is 95mm which allows for use of flasks up to 3 Liters.…

The LaboPlast® disposable scoop made of polystyrene is produced and assembled in our clean room of class 7 (10,000, except for the 1000 ml scoop) and individually wrapped for disposable use. The disposable scoop is ideal for powders, granulates and pastes. The scoop with transparent cover…

PharmaSpoon for taking samples of powdery substances, intermediate products and material in the pharmaceutical industry. Special materials with excellent surface qualities must be used for this to prevent cross-contamination. Our PharmaSpoon fulfils these requirements. Made of stainless steel AISI…

Open-Ended Drum Thief Soda lime glass units easily broken for quick disposal. All are 43 inches long; capacities from a full 55 gallon drum. Approximate capacity and diameter given in listings.

Burkle DispoTube ergonomic handle makes it easier to work and facilitates a good grip even under difficult conditions, for example with gloves. (21mm diameter) These single-use DispoSamplers are available in packs of 20 each. They are used to take target point samples, all-layer and…

Cylindrical hollow drill with a sharp cutting edge, can easily be driven into paste-like and semi-solid substances. The samples cut out are subsequently removed with the appropriate push-rod ejector. Total length 260 mm. Inner Ø 8 mm, outer Ø 10 mm. Stainless steel AISI 304…

The A836 range are a popular selection of containers ideal for storing powders and liquids. The 2" tri-ferrule style lid is a popular feature as it allows it to be clamped to anything with the same profile. The robust clamped lid gives a powder and water tight fit. Multi purpose containers …

Sampling spoon for withdrawing small quantities of samples. This specially shaped spoon lets you reach almost every corner in a container and prevents samples from trickling out. Made of AISI 304 (1.4301) stainless steel Largely chemical resistant (not against acids and alkalis)

Adjustable-width chutes Lever-release hoppers SP-2.5 Versa-Splitter® for 3/4in (19mm) and smaller sizes has wide application for use with fine aggregates as well as many coarser sizes. It is rugged enough for use in the field as well as on the laboratory bench. The 0.28ft³ (7.9L)…

Biocide free cellulose sponges in a variety of pre-hydrated dilutions for sample collection. Our hydra sponges are pre-moistened for convenience, durable, biocide-free cellulose maintains organism viability. Benefits: Improved consistency Increased accuracy of results Reduced…

Dip sampler for simple removal of liquid samples. Good view due to transparent tubes. Upper end with reflux valve, lower end with ball valve. PP, transparent Dip sampler, item no. 5315-0200, steplessly extendable from 100 cm to 200 cm All-layer and point sampling possible

The LaboPlast® disposable spatula made of polystyrene is produced and assembled in our clean room of class 7 (10,000) and individually wrapped for disposable use. As a result of the long, ergonomically-shaped, stable handle and a sharp blade, it is possible to even penetrate directly into…

Stopcocks are rugged, reusable and provide independent flow control to meter the sample as it is pulled through the vacuum.

Pk.20 polycarbonate caps for ready to use sampler