Lab Sampling Systems
-
HDPE Dippers
DynalonGraduated Plastic Dipper 2 Pour spouts PVC hand grip on 1" diameter HDPE rod 500mL & 1000mL beaker welded to the rigid handle at a 45º angle High density polyethylene dipper for removing samples from large tanks. Made in the USA, these plastic dippers are lightweight…
-
Fluid Point Sampler
Sampling SystemsManufactured in 316L stainless steel with a silicone seal (FDA grade). Available in; 600mm, 1000mm and 1500mm lengths. Sample volumes; 160ml, 300ml and 450ml. Easy to clean. Operation Insert the sampler into the liquid. Pull the handle to take the sample. Withdraw…
-
LaboPlast® Scoops
BürkleThe LaboPlast® disposable scoop made of polystyrene is produced and assembled in our clean room of class 7 (10,000, except for the 1000 ml scoop) and individually wrapped for disposable use. The disposable scoop is ideal for powders, granulates and pastes. The scoop with transparent cover…
-
Jumbo Samplers
BürkleJumbo sampler with a tube diameter of 50 mm, ideal for coarse grains and larger quantities. With an open inner tube and large sampling volume, for all-layer samples through all layers of the sample or with sample chambers separated by PTFE separators for multi point sampling from several…
-
10 position standards rack 31mm
PerkinElmer10 position standards rack, 31mm, for 30 mm PFA vessels (N8145132, N8145133, and N8145134) or 31 mm digestion tubes
-
PowderThief Powder Samplers
Sampling SystemsOriginated by Sampling Systems™ over 20 years ago and is a firmly established world leader in powder sampling. The Powder Thief is extensively used throughout the pharmaceutical, chemical and food industries around the world. The PowderThief is suitable for sampling free flowing powders…
-
Sterileware® Long Handle Sampling Spoons
SP Bel-ArtDesigned to gather small amounts of sample material, especially in hard to reach containers. Long handle reaches into jars, bottles and other confined areas Minimizes the potential of personal contact with sampled material Sterile, FDA grade polystyrene safe for food, drug and…
-
-
This 45-position sample/collection rack features wells designed for 120 mL vials. It's compatible with the APS-1650.
-
Sorbent Tube, Anasorb CSC, Coconut Charcoal, 6 x 70-mm size, 2 sections, 50/100 mg sorbent, 20/40 mesh, with GS ends and FFW separators, fits Type A tube cover.
-
Swing Sampler
NascoAllows collection from different angles, including 90° Samples liquids, powder or small solids 6' pole extends to 12’, 8' pole extends to 24' Includes 960 mL , wide mouth, high-density polyethylene bottle End of sampler swings, allowing collection of sample from a horizontal flowing…
-
The PerkinElmer Sample Tray for PerkinElmer AS-93 plus/S10 Autosampler with 60 locations for 15 mL solution containers.
-
Sterileware Liquid Thief
SP Bel-ArtAvailable in two lengths to suit your needs, these sterile liquid thieves draw a sample with a simple pull of the handle, then dispense easily into the vessel of your choice. Ideal for sampling water and other low viscosity liquids, oils and ointments; 0.15cm (¹⁄16") tip hole…
-
In response to numerous requests from our customers, we have developed close-it food & pharma, a control seal with an adhesive approved for use with foodstuffs. The strength of the adhesive is almost as powerful as that of the original, the close-it from Bürkle, proven millions of times.…
-
Stainless Steel Buckets
Sampling SystemsThese high quality Stainless Steel Buckets with swing handles are ideal for a range of applications. Crevice free interior Graduated Supplied with skirt band Robust design Manufactured from 304 Stainless Steel Lids sold seperately
-
SteriWare® Disposable Pallet Knife
Sampling SystemsThe SteriWare™ Disposable Powder Funnel is ideal for transferring powders. Available both sterile & non-sterile. Made from chemically resistant, food grade HDPE. Key Features: Moulded & packed in a Class 100,000 Cleanroom Individually bagged Made from FDA, EC…
-
Glass Chamber with 24 Positions
PerkinElmerSPE Vacuum Manifolds accommodate either 12 or 24 cartridges; 1, 3, 6, 15 and 25 mL columns can be used. Manifolds are equipped with a vacuum port to connect a standard laboratory vacuum pump. Vacuum pulls the sample through the stationary phase, metered by the stopcocks, to control the speed of the…
-
The Sludge Judge®
NascoThe Sludge Judge® is designed to take accurate readings of settleable solids, 5% or less, in a variety of liquids, to any depth. It is ideal for sewage treatment plants, chemical plants, and food processing facilities - anywhere that accurate sample levels of settleable solids in noncaustic…
-
SteriWare® ViscoThief Samplers
Sampling SystemsThe SteriWare ViscoThief is simple to use and comes with the added advantage that there is no cleaning validation and no cleaning. The sampler is made in a cleanroom so you simply unwrap and use. This is the ideal sampler for creams, pastes, gels and ointments. The single use ViscoThief is a…
-
Round Scoop
Cole-ParmerMore economical than stainless steel, these aluminum scoops feature durable, one-piece construction and smooth polished finish. Ribbed handle provides easy gripping, even when your hands are wet.
-
Vessel base made of TFM for High Pressure 100 mL (100 Bar) Digestion Vessel for Titan MPS 8 Position Microwave Sample Preparation Systems.
-
Clean-Trace Surface ATP
NeogenReal-time ATP surface hygiene test which gives an objective indication of cleanliness in seconds. With its unique liquid stable enzyme, the test offers superior levels of repeatability. This aspect of its performance and its incredible simplicity means customers throughout the world have put…
-
Stainless Steel Mini-Pots
Sampling SystemsMini-Pots from Sampling Systems are high quality containers made from 316L Stainless Steel. They have a crevice free interior and are widely used in the pharmaceutical & chemical laboratories worldwide. Available in a range of sizes Satin finish Multi purpose small volume containers …
-
Translucent polypropylene tubes, 17 mm x 100 mm, are designed to provide excellent chemical resistance.
-
Ideal for collecting environmental surface sampling without touching the sponge. Polypropylene handle allows maximum contact of the sponge with the sampling surface and helps with the collection of hard-to-reach surfaces, around corners and irregular shaped areas. The PolyProbe™ is…
-
SteriWare® LiquiThief Samplers
Sampling SystemsThe SteriWare LiquiThief is simple to use and comes with the added advantage that there is no cleaning validation and no cleaning. The sampler is made in a cleanroom so you simply unwrap and use. If you want to buy a disposable liquid sampler then the LiquiThief is the sampler of choice. The…
-
Stainless Steel Toggle Drums
Sampling SystemsThis range of heavy duty Stainless Toggle Drums from Sampling Systems are ideal for storage and production. As standard they come with a fully welded handle, silicone seal (FDA Grade) and lid. The lid is secured with pull down latches (toggle clamps). Manufactured from high grade 316L Stainless…
-
-
SteriWare® Powder Funnel
Sampling SystemsThe SteriWare™ Disposable Powder Funnel is ideal for transferring powders. Available both sterile & non-sterile. Made from chemically resistant, food grade HDPE. Key Features: Moulded & packed in a Class 100,000 Cleanroom Individually bagged Made from FDA, EC…
-
SPB 50-24, 24 position 50 mL 115/230 V
PerkinElmerGraphite blocks are PTFE-coated to resist aggressive corrosive attack for guaranteed long life in harsh laboratory environments. Our sample blocks operate with either a SPB Digital Controller or SPB Touch Controller*. Please select a controller below and the appropriate Start Up Kit* which includes…
-
SteriWare® V-Spatulas, Type 1
Sampling SystemsThe new SteriWare V-Spatula Collection from Sampling Systems are ideal for sampling powders. Available in a range of widths and lengths there is a perfect spatula for every application. Key Features: Moulded & packed in a Medical Cleanroom Individually bagged in ultra-strong…
-