These 20 mL polypropylene tubes, with screw caps, have an outer diameter of 20 mm and are designed to provide excellent chemical resistance.

LiquiSampler for liquids, according to DIN EN ISO 15528. Made of ultra pure and chemically inert PTFE/FEP or PP for contamination-free sampling. Sampling from open and closed containers, barrels, tanks, silos, water courses. Suitable for all commercially available barrels and containers with…

Graduated Plastic Dipper 2 Pour spouts PVC hand grip on 1" diameter HDPE rod 500mL & 1000mL beaker welded to the rigid handle at a 45º angle High density polyethylene dipper for removing samples from large tanks. Made in the USA, these plastic dippers are lightweight…

Liquid Sampler 3' 500 mL ( 1212X48 ) Product Dimensions (l x w x h) : 0x2.937x45.75in 3' handle sampler with 500 mL bottle. Manufactured from chemically resistant high density polyethylene this sampling device is perfect for corrosive environments and for hard to reach places.…

For easy sampling from tanks, vats, lakes, etc., these high-density polyethylene plastic dippers will not rust or corrode, provide excellent chemical resistance and float, “just in case.” Handles are 2.9cm (1-1/8”) in diameter and welded to a rigid sampling bowl at a…

3M™ Sponge-Sticks are available in wet or dry formats, with and without gloves, to fit many applications. The 1.5" x 3" 3M Sponge-Stick allows sampling without directly handling the sponge. Stick-mounted sponge design allows the ability to access hard to reach areas without…

High-quality 316L stainless steel (SS) scoops with no dead spaces or crevices Smooth, mirror polish surface—better than 0.5 µm Ra is ideal for powders and granules Heavy gauge 316L SS offers excellent corrosion resistance and strength BSE/TSE free These easy-to-clean 316L SS…

The Pure•SAL2™ Saliva Purification Kit for Liquid Biopsy is intended for the controlled and standardized collection of oral fluid specimens, including cell-free RNA [miRNA and mRNA], cell-free DNA, exosomes, or proteins, for subsequent stabilization and analysis in life science and…

Cover Gasket to house the stopcocks are available for purchase with either 12 or 24 stopcocks options.

The LiquiDip is a fast efficient disposable liquid sampler. It is a self-closing liquid sampler that offers both cross sectional and point sampling. A valve is housed on the base of the sampler. Upon contact with the bottom of a container, the valve will close, locking the liquid inside.…

The LaboPlast® disposable spatula made of polystyrene is produced and assembled in our clean room of class 7 (10,000) and individually wrapped for disposable use. As a result of the long, ergonomically-shaped, stable handle and a sharp blade, it is possible to even penetrate directly into…

DNA•SAL™ is a revolutionary salivary DNA collection kit used for the collection of DNA from saliva. The device abrades cells and saliva in the mouth via a series of serrated edges resulting in the accumulation of a mixture of oral fluids (saliva) and cells that are trapped in an array of…

This range of heavy duty Stainless Toggle Drums from Sampling Systems are ideal for storage and production. As standard they come with a fully welded handle, silicone seal (FDA Grade) and lid. The lid is secured with pull down latches (toggle clamps). Manufactured from high grade 316L Stainless…

Suitable for sampling wax, cheese, greases, powders, granules. 316L stainless steel High quality bright polish finish Crevice free construction Operation Push the outer tube into the product Use the push rod to eject the core of product from the outer tube

Dipping bottle for testing mineral oil products Category A, Explosion Categories IIA, IIB and IIC, crude oil, liquid mineral oil products, fuels, special and test fuels, fuel oils, petroleum and liquid lubricants. Completely made from non-spark producing materials, nickel-plated. Screw-off…

The SPB Probe provides direct control and monitoring of actual sample temperature via a corrosion-resistant, PFA-coated temperature probe. Available with different holders in a 6"configuration for use with 50 and 100 mL DigiTUBE®s. Each probe is supplied with 5 Probe Watch Glasses and a probe holder.

The PerkinElmer Sample Tray for PerkinElmer AS-93 plus/S10 Autosampler with 60 locations for 15 mL solution containers.

Open-Ended Drum Thief Soda lime glass units easily broken for quick disposal. All are 43 inches long; capacities from a full 55 gallon drum. Approximate capacity and diameter given in listings.

Oral sample collection has gained widespread acceptance due to its non-invasive nature and because continuous visual contact of the collection process is possible. Current non-invasive collection products are designed for immediate detection using stick-based technology, but are limited to simple…

Sample cups are of heavy-duty construction to prevent cracking or tipping. Their conical design allows for use of nearly the entire sample. Translucent; preferred for most solvents.

Translucent polypropylene tubes, 17 mm x 100 mm, are designed to provide excellent chemical resistance.

This hand controlled tool allows users to take liquid samples at specific depths. Simply place thumb over top hole, insert to desired depth, remove thumb to allow liquid to enter the tube, place thumb back over tube to prevent liquid from moving in or out, and remove. Polyethylene plastic…

The gentle collection and lysis chemistry of the alcohol-free iSWAB buffer allows for recovery of double-stranded, large fragment DNA similar to the genomic DNA generated from blood, making it suitable for complex genomics downstream arrays such as microarrays and Next Generation Sequencing. Other…

A robust and efficient sampler that is ideal for sampling ice and waxy products, the sharp cutting teeth mean that the device would be suitable for use on frozen products such as meat. Key Features Suitable for ice, wax and other similar materials. 316 Stainless Steel Operation …

The SteriWare ViscoThief is simple to use and comes with the added advantage that there is no cleaning validation and no cleaning. The sampler is made in a cleanroom so you simply unwrap and use. This is the ideal sampler for creams, pastes, gels and ointments. The single use ViscoThief is a…

To create a more comprehensive profile of our health and wellness vs. disease, multiple analytes need to be included in the analytical mix such as DNA, RNA, proteins, and cell morphology. Unfortunately due to the limitations of current sample collection practices this means multiple samples need to…

Mini-Pots from Sampling Systems are high quality containers made from 316L Stainless Steel. They have a crevice free interior and are widely used in the pharmaceutical & chemical laboratories worldwide. Available in a range of sizes Satin finish Multi purpose small volume containers …

Translucent polypropylene tubes, 17 mm x 100 mm, are designed to provide excellent chemical resistance.

Scoops. Flat Bottom. High-density Polyethylene. 25 mL liquid capacity. Heavy duty scoops with many industrial and laboratory applications. Suitable for liquids and powders.

Mix and Divide a Water Sample into Subsamples for Testing Provides an efficient method of preparing subsamples of collected water-sediment mixtures from stream flows for water quality analysis. Water sediment samples are poured into the sample splitter where they are composited into one…

The new SteriWare Disposable Capsule Counting Trays from Sampling Systems are made from robust, shatterproof PS. Capsule trays are suitable for use with all capsules from Size 2 to Size 00. Key Features: Moulded & packed in a Medical Cleanroom Individually bagged in ultra-strong…

Our high quality, hygienic Disposable Trays have sold in large numbers to both pharmaceutical factories and hospitals around the world. Manufactured in a cleanroom from FDA and EC  conforming PP, each tray is individually bagged and ready for use. Sterile and non-sterile options are…