Plastic Cuvettes for Spectrophotometer
Essential products in this category include square spectrophotometer cells designed for precise optical work, ensuring consistent results in spectrophotometry. Polystyrene fluorometry cuvettes are specialized for fluorescence measurements and can offer high clarity and minimal interference.
Although primarily for nuclear magnetic resonance, NMR tubes are also essential in certain optical studies. Semi-microcell experiments may require smaller sample volumes to enhance measurement accuracy and reduce lab waste.
Source lamps are also essential as they provide the light source needed for all forms of spectrophotometric analysis.
Each product, from micro quartz cuvettes to macro cells, is crafted to assist with the precise and efficient analysis of samples. Plastic cuvettes for spectrophotometers have varied designs and functions and are indispensable for accurate optical measurements in various applications.
-
Agilent Holmium Oxide Filter
Agilent TechnologiesThe Agilent Technologies holmium oxide filter is used for the elimination and removal of very fine and small particles that is normally not filtered through regular filter paper. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
Agilent Neutral Density Filter Kit
Agilent TechnologiesThe Agilent Technologies neutral density filter kit is suitable for the purpose of minimizing the amount of light from entering the glass lens thus nullifying the effects of density. This product is only available to U.S. Domestic Customers. For research use only, not to be used in…
-
-
Rectangular Fluorescence Cell
Agilent TechnologiesRectangular fluorescence cell, quartz, anaerobic, 10 mm pathlength, 3.5mL, 1/pk. Includes inlet tubing and a reservoir (1.5mL) joined to the cell using a ground glass joint, for collecting excess gas produced by anaerobic experiments. Evacuation tube is 4 mm ID, 6 mm OD and 30 mm long. Compatible…
-
A wide selection of cells to meet the demanding specifications of UV/VIS spectrophotometers. All cells are fire-fused so they can be cleaned repeatedly and there are no seams or joints to lock in air. 100% handcrafted and individual inspection guarantees the highest quality levels and excellent performance.
-
UV Convenience Kit
Agilent TechnologiesThe Agilent Technologies UV convenience kit comes with two open top UV quartz cell, 10 mm, 3.0 mL, 5061-3387 disposable polystyrene cells, 10 mm, 3.5 mL volume, 6610018800 cell tray with capacity for 16 cells, 5063-6577 lint-free lens cleaning paper, 9300-0761 and UV cell cleaning solution. This…
-
A wide selection of cells to meet the demanding specifications of UV/VIS spectrophotometers. All cells are fire-fused so they can be cleaned repeatedly and there are no seams or joints to lock in air. 100% handcrafted and individual inspection guarantees the highest quality levels and excellent performance.
-
-
Minimum working capacity as shown in listings Cell bodies are of fused-wall construction. Matched sets are supplied in cushioned storage box. Includes Teflon® cover. 8491M18 cells require 8494J20 adapter to accommodate cells in standard cell carrier.
-
PTFE tube for RSA, 0.042mm id. Per m
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Disposable Polystyrene Cuvettes for Spectrofluorometers Negligible variation in absorbance between the 4 optical sides allows readings from any side. Standard 10 mm light path Designed specifically for fluorometry, cells are also ideal for nephelometry and spectrophotometry. The…
-
NMR Tube 3mm 8" Cs5
DWK Life Sciences (Kimble)100% gauged for wall thickness, concentricity and camber specifications Attached polyethylene caps OD 3.0124 (+0.00/-0.013) mm Wall thickness 0.284 mm Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
-
-
Agilent Power Supply Y-Adapter
Agilent TechnologiesThe Agilent Technologies power supply Y-adapter is made from strong and sturdy metal that offers good corrosion resistance thus enhancing the durability. This fitting provides a secure connection forming a leak-proof seal. This product is only available to U.S. Domestic Customers. For…
-
Cuvette Standard Q Quartz Glass
Mettler ToledoReliable, Reusable Glass Cuvettes. The Standard Q macro cuvette with an optical path length of 10 millimeters is made of fused quartz glass and comes in a matching pair. For measurements in the ultraviolet and visible range with a wavelength between 200 nm – 2500 nm. Accuracy by…
-
Valved NMR Tubes
DWK Life Sciences (Kimble)Designed to improve the safety of sample handling for the investigation of volatile, air-sensitive and toxic compounds Precision grade NMR tubes Available in 7, 8 and 9 inch lengths Condensing takes place directly into the NMR tube using vacuum techniques. HI-VAC® valve allows…
-
A wide selection of cells to meet the demanding specifications of UV/VIS spectrophotometers. All cells are fire-fused so they can be cleaned repeatedly and there are no seams or joints to lock in air. 100% handcrafted and individual inspection guarantees the highest quality levels and excellent performance.
-
Spectrofluorometer Cells With polished bottom for excitation through floor of cell Minimum working capacity 3 mL Cells can also be used for absorption measurements through 10 mm light path Cells have all four sides and bottom polished; 8429N30 furnished with Teflon cover, N19…
-
Flow-Through Cells
Agilent TechnologiesUntil recently, flow-through cells had measuring chambers that were either rectangular or circular in shape. These shapes were dictated by limitations in the manufacturing process and did not offer the best geometry for clean flushing and reduction of contamination. Now Agilent has developed new…
-
Short Pathlength Spacers
Starna CellsBlack anodized aluminum spacers are available in three sizes for use with 1, 2, and 5mm path length cells, supporting them in a normal 12.5 x 12.5mm holder where there is no cell holder path length adjustment facility.
-
Miscellaneous UV/Vis Cary Thumbscrews Kit
Agilent TechnologiesThe Agilent Technologies thumbscrews kit is suitable for use with Cary 4/5/6000 instruments. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
A wide selection of cells to meet the demanding specifications of UV/VIS spectrophotometers. All cells are fire-fused so they can be cleaned repeatedly and there are no seams or joints to lock in air. 100% handcrafted and individual inspection guarantees the highest quality levels and excellent performance.
-
Sample holder 1in round Cary7000 UMS/UMA
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Thomas Polystyrene Cuvettes
Thomas®Disposable Polystyrene Cuvettes Convenient and affordable Save time with no cleaning required Prevent cross-contamination Useable in the range of 340 to 750 nm Tight dimensional tolerances ensure high reproducibility from package to package. 10 mm path length; 12.5 x 12.5…
-
Specac Omni-Cell Spacers
SpecacThe Specac omni-cell spacer is designed to use inside a sealed cell to permanently attach to the demountable windows.
-
Scienceware® Spectrophotometer Cuvette Racks
SP Bel-ArtHold Fragile Spectrophotometer Cuvettes in Complete Safety These two tier racks support cuvettes with a minimum of physical contact, greatly reducing the chance of damage. Only the corners of the cuvettes touch the racks Accommodate 12 cuvettes of 10mm light path Will not…
-
Agilent Deuterium UV Lamp
Agilent TechnologiesThe Agilent Technologies deuterium UV lamp is mainly used in the process of spectroscopy to maintain a continuous spectrum throughout. The low-pressure gas-discharge design ensures durability. This product is only available to U.S. Domestic Customers. For research use only, not to be used…
-
Cobas Mira® Cuvettes
Globe ScientificGlobe Scientific's 12-place Cuvette segments are designed for use on the Cobas Mira®, Mira S® and Mira Plus® analyzers. They are sold individually wrapped or in racks of 15 cuvette segments.
-
Cylindrical Cell
Agilent Technologiessupplied with 1 PTFE stopper, Suits all Agilent UV-Vis spectrophotometers. Requires a cylindrical cell holder. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
The Specac accessory is suitable for use with infrared spectroscopy omni cell systems. It is mainly used in research facilities and chemical laboratories. It ensures best quality, reliability and enhanced durability.
-
Agilent Cell Base
Agilent TechnologiesThe Agilent Technologies cell base is an ideal accessory to have in any chemical laboratories, research facilities, manufacturing industries and pharmaceutical factories. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
Flow-Through Dissolution Cell
Agilent TechnologiesM6 threaded inlet and outlet ports, inlet/outlet tubes 400 mm length, z height 20mm. Compatible with Agilent Cary 100/300 UV-Vis spectrophotometers. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.