Stir Bars
-
Octagon Spinbar® Magnetic Stir Bars
SP Bel-ArtOctagon magnetic stirring bars with integral pivot ring are the most commonly used shape. Alnico magnet encapsulated in FDA Grade, USP Class VI Teflon® PTFE low friction coating; durable and inert Interrupted profile provides greater surface area and added turbulence when compared to…
-
2MAG Asteroid extra strength stirring bar
MilliporeSigmaNew developed, high-effective stirring bar, ideal for large mixing volumes, viscous media, stirring over wide distances or for disadvantageous vessel bottoms.More than 4x higher torque transmissible, unbeatableincreased mixing effect in comparison to conventional stirringbars, high energetic and…
-
Spinplus® Magnetic Stirring Bars
SP Bel-ArtSpinplus® magnetic stirring bars add speed and efficiency to mixing operations. The "+" shape creates a deep vortex and provides stable, quiet operation Alnico magnet encapsulated in FDA Grade, USP Class VI Teflon® PTFE low friction coating; durable and inert …
-
Magnetic Stirring Bar External Retriever
SP Bel-ArtThe retriever is placed against the vessel wall where the stirbar is located. Slide the retriever up along the vessel wall, and the stirring bar follows along the inside wall of the vessel up to a point where you can manually pick it up. The oblong section 25x70mm (1" x 2-3/4") houses the…
-
Polygon Spinbar® Magnetic Stirring Bars
SP Bel-ArtThese stirbars have polygon multifaceted surfaces that add turbulence relative to similar smooth size cylindrical bars. Center molded pivot ring minimizes the contact area between the bar and the vessel; reduces friction and chattering Marring of plastic containers is diminished …
-
Magnetic Stir Bar Retriever
CorningThe Corning stir bar retriever contains a strong magnet to remove a stir bar from all glass and plastic containers used in the laboratory. The container must be taken off the magnetic stirrer before using the retriever as the high-powered magnet in the stirrer cancels out the one in the retriever.…
-
Cylindrical Magnetic Stir Bars
Kemtech AmericaCylindrical magnetic stir bar with pivot ring. various sizes available.
-
Stirring Rods
DynalonStirring rods are available in two versions: Pure PTFE solid stirring rod with tapered end, and pure PTFE stirring rod with mild steel core. The stirring rod version with steel core can be bent into a permanent shape. Inert and will not scratch, use up to 280°C.
-
Color Octagon Spinbar® Magnetic Stir Bars
SP Bel-ArtOctagon magnetic stirring bars with integral pivot ring are the most commonly used shape. Choose from red, yellow or blue. Alnico magnet encapsulated in FDA Grade, USP Class VI Teflon® PTFE low friction coating; durable and inert Interrupted profile provides greater surface area and…
-
Plastic Stirring Rod
United Scientific SuppliesStirring rods made of polypropylene, with both ends rounded.
-
Rare earth extra power stir bars
MilliporeSigmaStirring bars using rare earth magnets have significantly increased magnetic strength compared to those using Alnico magnets, but more importantly they are almost totally resistant to demagnetisation.Stir bars using rare earth magnets are identified by a carbon black spot which us chemically inert.…
-
Convenient assortment packs suit a variety of needs. Choose from octagonal, round, micro or color-coded bars to best suit your needs Alnico magnet encapsulated in FDA Grade, USP Class VI Teflon® PTFE low friction coating; durable and inert Manufactured in a registered ISO…
-
smartSENSE® Wireless Spin & Temperature Sensing Stir Bar
Gate ScientificThe smartSENSE® wireless stir bar is the only stir bar that can measure and communicate in real time the temperature of the liquid in which it is immersed as well as the actual spin speed of the stir bar – allowing for continuous control and monitoring of any formulation in a closed…
-
Round, PTFE coated stirring bars. RS 1 Set of magnetic stirring bars Consisting of the IKAFLON® and TRIKA® Magnetic stirring bars: IKAFLON® 10 Magnetic stirring bar IKAFLON® 15 Magnetic stirring bar IKAFLON® 20 Magnetic stirring bar IKAFLON® 25…
-
Mixing Paddle, 40"
Remco ProductsThis two-in-one tool is handy for both mixing and scraping, and is great for a variety of applications such as soup, confectionery, dough, and sauce manufacturing as well as many other food processing or other mixing tasks. One-piece construction and the unique long-handle design make it easy to…
-
Stir Bars, Egg-Shaped
DynalonStir Bar Egg-Shaped 3/8X3/4" (1210D76 ) Product Dimensions (l x w x h) : 0.785x0.397x0.4in PTFE 20 mm length Stir Bar Egg-Shaped 1/2X1" (1210D77 ) Product Dimensions (l x w x h) : 1x0.511x0.515in PTFE 25 mm length Stir Bar…
-
Reduce frequency of spinout in viscous solutions or when stirring at high speeds. The high magnetic field strength of Samarium Cobalt (Rare Earth) magnets can provide up to three times stronger coupling vs. Alnico magnetic stirring bars. Stronger coupling with the drive magnet keeps…
-
Spinfin® Magnetic Stirring Bars
SP Bel-ArtSpinfin® magnetic stirring bars agitate liquids in round bottom vessels such as test tubes, cylinders and flasks, where other stirring bars cannot be used. Maintains its position in a vessel and will not wobble Alnico magnet encapsulated in FDA Grade, USP Class VI Teflon® PTFE…
-
Scienceware® Stirring Paddle
SP Bel-ArtFor Hand or Automated Mixing This stirring paddle is ideal for mixing liquids in large vats and tanks High density polyethylene Handle length: 91cm (3 feet); diameter: 25mm (1") Paddle dimensions: 7.6 x 15.2cm (3 x 6")
-
smartSENSE® Wireless Temperature Sensing Stir Bars
Gate ScientificThe smartSENSE® wireless stir bar is the only stir bar that can measure and communicate in real time the temperature of the liquid in which it is immersed – allowing for continuous control and monitoring of any formulation in a closed setup. Accuracy of the data is ensured by the embedded…
-
Spinvane® Triangular Magnetic Stirring Bars
SP Bel-ArtSpinvane® Magnetic Stirring Bars triangular shape is designed for small conical-shaped tubes and micro vials. Triangle shaped vane is made of solid FDA grade, USP Class VI Teflon® and has a cross-mounted, molded-in Alnico magnet Each size is manufactured for a specific size tube;…
-
Stir Bar Kit, Magnetic, PTFE, Micro
ChemglassStir Bar Kit, Magnetic, PTFE, Mirco, To Consist Of The Following: 6ea CG-2003-12, 6ea CG-2003-14, 6ea CG-2003-16, 3ea CG-2003-10, 3ea CG-2003-13, 3ea CG-2003-17.
-
Stir Bar, Giant, Magnetic, PTFE
ChemglassThis heavy duty PTFE stir bar is capable of mixing volumes up to a 50 gallon drum. Perfect for use with carboys up to 12 gallon. The bar will fit into a minimum neck diameter of 32mm. Manufactured with FDA-grade and USP Class VI PTFE.
-
The multifaceted magnetic stirring bar surface adds turbulence relative to similar size smooth cylindrical stirring bars. Ideal for single use applications mixing radioactive reagents or when cross contamination might be a concern Alnico magnet encapsulated in FDA Grade, USP Class VI…
-
PTFE Stirring Bar 25.4mm
Bellco GlassMolded, seamless Teflon construction ideal for procedures using all bellco magnetic stirrers. Excellent for mixing media and buffer solutions Size: 25.4 x 7.6mm Case qty: 6
-
Scienceware® Spinbar® Restrainer
SP Bel-ArtHolds on to magnetic stirring bar Easily retrieve magnetic stirring bars from vessels with the handheld Spinbar® Restrainer. Don’t lose magnetic stir bars down lab drains and eliminate the splashing hazard when pouring out of mixing containers. The tool fits comfortably…
-
Two lengths to fit a wide range of vessels Autoclavable While many magnetic stirring bars are impeded by powders in a liquid, the Saturn Spinbar overcomes this problem. A large bulb in the bars center lifts the stirring bars ends while spinning thereby reducing surface contact area and…
-
Spinwedge® Spinbar® Magnetic Stirring Bars
SP Bel-ArtSpinwedge® magnetic stirring bars provide strong turbulence at fairly low speeds and are well suited for churning sediment or dissolving salts. Wedge shape is designed to plow up sediment for thorough dispersion Sharply angled broad face provides strong mixing action, perfect for…
-
This magnetic stirring bar fits into the standard 10mm light path cuvette and provides rapid vertical and horizontal mixing with a minimum of vortexing when placed on a magnetic stirring machine. Centrifugal pumping action, generated by the cross channels in the upper face, mixes without…
-
PTFE Stirring Bar 76.2mm
Bellco GlassMolded, seamless Teflon construction ideal for procedures using all bellco magnetic stirrers. Excellent for mixing media and buffer solutions. Size: 76.2 x 12.1mm Case qty: 3
-
-
United Scientific™ GLASS STIRRING RODS
United Scientific SuppliesPack of 12 stirring rods. Rods are made of soft flint glass, with both ends fire-polished and rounded.