General Purpose Lab Syringes
Designed to ensure precise and accurate measurements, they carry clear and easy-to-read graduations to allow high levels of accuracy.
Sizing options include a 10ml syringe, 100ml syringe, and 1ml syringe, all available as bulk syringes or individual sizes.
Lab syringes are manufactured from various materials, including glass and plastic options. All science syringes offer excellent control and easy dispensing of liquids which is ideal when working with sensitive samples.
Plastic needle syringes are disposable and sterilized and carry special syringe caps, allowing temporary storage.
Many syringes feature standardized fittings, making them compatible with other laboratory equipment.
Accessories available include syringe plungers, pipetting needles, and syringe barrels to provide easy and convenient methods of operating within the lab.
-
Techon Wiper Piston
OK InternationalWiper Pistons ensure that the pressure is evenly spread across the fluid surface to provide consistent dispensing. Wiper seal pistons prevent dripping and eliminate material waste by wiping the syringe barrel wall clean as fluid is dispensed. Maximum operating pressure is 100 psi (6.9bar).
-
Monoject™ Rigid Pack Syringe
Cardinal HealthMonoject™ Rigid Pack syringes are sterile, individually packaged, and single-use syringes without a needle.
-
HSW Norm-Ject® Luer Lock Syringes
Air-TiteNORM-JECT® syringes are latex free, contain no rubber, no silicone oil, styrene or DEHP and are DNA free. These syringes are the choice for any situation needing an inert, non-reactive syringe. Because of their composition they are indicated for Nuclear Medicine, Amniocentisis, IVF,…
-
All-Plastic Syringes
Air-TiteNo rubber, silicone or lubricant Inert, sterile; low trace element content Research study proves low inherent toxicity Clear, easy-to-read graduations Smooth drawing, with safety stop to prevent plunger separation. Features polypropylene barrel with polyethylene plunger,…
-
Disposable Plastic Syringes
National ScientificFor use with syringe filters No rubber or synthetic plunger gaskets No silicone oil lubricant Luer-Slip or Luer Lok® fittings Two-part, all plastic syringes have polypropylene barrels and either polypropylene or polyethylene plungers for a wide range of chemical…
-
Retractable Needle Safety Syringe
Sol-MillenniumFor situations when luer lock needle systems are required or preferred, Sol-Millennium Medical introduces the SOL-CARE™ luer lock safety syringe. This product is designed with an integrated safety feature which retracts the needle back into the barrel. Tthe plunger can then be broken off to…
-
Sol-M® Syringe without Needle
Sol-MillenniumSol-M 3-Piece Syringes accurately measure liquid medications and are available in a wide range of sizes. High-transparency barrel to easily visualize contents Silicone lubrication ensures smooth plunger movement Plunger backstop that prevents accidental withdrawal of plunger…
-
Non-sterile, clean, ready-to-use Assembled, graduated Bulk packed in double wrapped polybags. Can be autoclaved or gas sterilized out of polybags. 8940S32, 8940S69, 8940T39, 8940T75, & 8940V50 *Intended use for general purpose fluid aspiration/injection and NOT for storage…
-
1000 Series Gastight Syringes
HamiltonTeflon ® PTFE tipped plungers Replaceable barrels, plungers and tips mL sizes For use with liquids or gases. Features a precision-machined Teflon plunger tip which, when wetted, forms an interference fit with the inner diameter of the glass barrel, achieving the seal required for…
-
SGE syringes have consistently been the choice of GC and LC equipment manufacturers for many years. They choose our products because their reputation depends on the performance of our components. Our knowledge and expertise in liquid handling technologies has enabled us to design syringes for a…
-
Autosampler Syringe
Agilent TechnologiesThe Agilent 500 uL syringe with 1/4-28 UNF screw thread is ideal for high-pressure applications. It allows for standard split or split-less injection of sample directly into the GC inlet for vaporization. Application: Chem Fitting with Instrument Stop, CX type with 1/4-28 UNF screw thread for…
-
Available in 5mL and 10mL capacities, the Gas Tight syringes are fitted with a valve (SVLL) and a special Luer Probe with a side hole for efficient sample intake.
-
Luer Slip & Luer Lock Syringe
Air-TiteAir-Tite Brand syringes are of the highest quality, yet are economical. Manufactured in China to our exacting specifications. All sizes have a centric tip except for 30ml, which has an eccentric tip. Packaged in individual sterile poly bags. Application: For Veterinary and Laboratory Use Only
-
PTFE syringe tubing gauge
MilliporeSigmaWith KEL-F Luer hub.A septum to be pierced with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE…
-
Anesthesia Needle, Bulk, Non-Sterile
Sol-MillenniumThe Anesthesia Needles are intended for injection of local anesthetics into the spinal and epidural spaces of a patient to provide regional anesthesia. The administration of the spinal anesthesia allows rapid anesthesia onset and the placement of an epidural catheter allows for bolus injections or…
-
Safety Winged Infusion Set
Sol-MillenniumSOL-CARE™ Safety Winged Infusion Set is a safety-engineered device intended for Short-term IV Administration. Each device features a simple safety mechanism that should be activated immediately after infusion is completed, thereby reducing the risk of needlestick injury.
-
CTC Autosampler Syringe
Agilent TechnologiesFor precise, effective, sample delivery from your CTC autosampler, Agilent has the right syringe for you. Whether you're performing liquid or headspace injections, or using a CombiPAL or PAL3 autosampler, you'll find what you need among our wide range of syringes for CTC autosamplers. For help…
-
SOL-CARE Saline Flush
Sol-MillenniumSol-Care® Saline Flush Syringe 0.9% NaCl provide ready-to-use saline flush solution to minimize risk of catheter occlusion, helps to improve patient safety. Features include: 1. Safety Cap: Avoid needlestick injuries. Compatible with needleless IV access system. Secure internal fluid…
-
Needle, Clear, 27 gauge, 0.5"
Jensen GlobalClear Threaded Luer Lock Hub; 27 gauge 0.5 inch High Precision tip - id inch:0.008(0.20mm) od inch:0.016(0.410mm). Polypropylene plastic threaded hub with burr free passivated stainless steel canula, bonded with a UV cured adhesive.
-
Syringe for PerkinElmer
Agilent TechnologiesChromatography syringes & needles are a critical component of the sample flow-path, transporting the sample between the storage vial and the instrument inlet. Maintaining consistent injection volumes with limited carryover and discrimination are crucial for success. Agilent offers a wide selection…
-
-
Rheodyne™ Blunt Needle Syringe
PerkinElmerThe Rheodyne™ blunt needle syringe with luer hub is the best device to transfer fluids from vials and IV bags. The 22 gauge construction offers added strength and durability.
-
SGE syringes have consistently been the choice of GC and LC equipment manufacturers for many years. They choose our products because their reputation depends on the performance of our components. Our knowledge and expertise in liquid handling technologies has enabled us to design syringes for a…
-
These syringes are designed to work with Valco VISF-1 HPLC injection valves. They have PTFE plunger tips that create tight connection between syringe barrel and plunger allowing for liquid or gas sampling. Removable Needle (RN) - needles are removable and are a Hamilton-specific design …
-
Monoject™ 35mL Syringes
CovidienMonoject™ 35mL syringes are sterile, single-use, individually packaged in either 100% recyclable rigid packaging or soft pack. Available with different tip styles for convenience.
-
CTC Autosampler Syringe
Agilent TechnologiesFor precise, effective, sample delivery from your CTC autosampler, Agilent has the right syringe for you. Whether you're performing liquid or headspace injections, or using a CombiPAL or PAL3 autosampler, you'll find what you need among our wide range of syringes for CTC autosamplers. For help…
-
SOL-CARE TB Safety Syringe w/Fixed Needle
Sol-MillenniumManually retractable needle safety syringe designed to aid in the prevention of needle stick injuries. The integral safety design keeps hands and fingers remain behind the needle during injection and activation of safety mechanism. After activation, the needle is secured into the barrel of…
-
Blunt Fill Needle
Sol-MillenniumSOL-M™ blunt fill needles can be used to draw-up medication, reconstitute medication and accessing IV bags. These needles can replace standard hypodermic needles to reduce the risk of needle stick injuries. SOL-M® blunt fill needle has a 45° bevel and is compatible with standard luer…
-
3-Way Stopcocks
Cadence ScienceCadence Science® stopcocks are precision-machined, individually lapped, and carefully mated to maintain pressure characteristics. These stopcocks are easily integrated with other stopcocks, manifolds, adapters, tubing, needles, and glass syringes. Made from nickel plated brass or…
-
1-Way Stopcocks
Cadence ScienceCadence Science® stopcocks are precision-machined, individually lapped, and carefully mated to maintain pressure characteristics. These stopcocks are easily integrated with other stopcocks, manifolds, adapters, tubing, needles, and glass syringes. Made from nickel plated brass or…
-
Syringe 1-10ml 2 Ring Handle Detachable Lock
DWK Life Sciences (Wheaton)Self-refilling automatic Detachable valve system Enhanced corrosion resistance Luer Lock nozzle Two-ring and pistol grip handle
-
1700 series syringes are the Gastight® version of the original Hamilton 700 series syringes. This series of syringes is ideal for dispensing volumes from 1 μL up to 500 μL. Gastight® syringes are ideal for dispensing both liquids and gases. They have a precision-machined PTFE plunger…