Right-to-Know Safety-Labeled Wash Bottles feature a wide mouth 53mm (2") for easy refilling. Bottles are pre-printed with the Chemical name and formula, the National Fire Protection Association (NFPA) Section 704 Four-color Diamond, health hazards, Chemical Abstract System (CAS) number, and…

Thomas® Exclusive- 5 Pack Economical No need to buy large quantities Color-coded: 5 colors 250 and 500 mL No need to buy 5 or 6 of each color to get a selection of colors. These low density polyethylene wash bottles are versatile and easy to use. The color-coded…

Prevent chemical accidents in the lab with Nalgene™ Right-to-Understand FEP Wash Bottles. Bottles are permanently etched with chemical identification and safe handling information following the Globally Harmonized System (GHS) specifications as applicable to secondary laboratory containers.…

The closure and stem are molded in one piece to make them leak proof. The angled neck and tip provide a uniform stream of liquid and the tip can be cut back if required to increase the flow. A wide bottled mouth makes filling easier. The bottle is made from LDPE with a PP closure.

Meet the latest requirements of GHS & OSHA HAZCOM 29 CFR 1910.1200 for workplace labels Safety vented Patented DripLok® valve prevents dangerous solvent drips The specially designed jet-tip provides precise dispensing control

Azlon’s new high quality wash bottles are supplied complete with unique, write on - wipe off labeling areas. Easy to reuse, time and time again, they are specially designed for full traceability and to meet stringent labeling requirements.  The bottle has been designed with a series…

Labeled with bold, eye-catching letters for safe and positive identification of common laboratory solutions Standard diamond alert symbols indicate the type of hazards the contents may present; CAS numbers are included where appropriate Permanent, colorful silk-screened labels put an end to…

Two pack Wash Bottles, 500ml capacity each Easy to read labeling, including chemical information and safety warnings (4 colors) Self venting design Made of low density polyethylene Color coded screw cap for easy identification (4 colors) Pack of two chemical wash bottles made with Eisco Labs…

Autoclavable, leakproof Nalge 2405 Made of contact-clear polypropylene copolymer with polypropylene screw cap and stem Stem and cap are molded in one-piece 9765N80 wash bottle takes cap number 28. 9765N90 wash bottle takes cap number 38.

Six pack Wash Bottles, 500ml capacity each Easy to read labeling, including chemical information and safety warnings (2 colors) Self venting design Made of low density polyethylene Color coded screw cap, nozzle & chemical information for easy identification Pack of six chemical wash bottles…

Pack of six unlabeled chemical wash bottles, 250ml capacity each Wide Mouth for easy filling. Self venting design to eliminate leaks & dripping Easy to control squeeze for dispensing Performance Plastics by Eisco Labs Superior quality low density polyethylene (LDPE) construction with long…

These bottles are manufactured from low density polyethylene and are offered with a narrow or widemouth. The cap and dispensing tube are manufactured from PP to optimize backflow of the solution. The design allows minimal turbulence of the liquid in the bottle.

These high quality natural wash bottles are supplied in flexible natural polyethylene and are fitted with a white leak proof, wide neck polypropylene spout closure. The wide neck offers easy spill-free filling, and the acute angled, precision molded dispensing spout, ensures a consistent, downward…

Extra fine needle point spray Easy-to-squeeze, low-density polyethylene Can be labled with Tech Pens; see part number 1222X42-X49

Excellent for use at industrial facilities, environmental, electronic, university and government research facilities and testing labs Nalge 2421 Leakproof; usable temperature 0° to 90°C Wide-mouth, molded in fluorinated polypropylene with fluorinated HDPE closure, stem and tube Silk-screened…

Chemical wash bottle with blank labels, 1000ml capacity Blank label provides maximum flexibility, allowing user to write in contents and safety information Wide Mouth for easy filling. Self venting design to eliminate leaks & dripping Easy to control squeeze for dispensing Performance Plastics…

Pack of six Distilled Water wash bottles, 1000ml capacity each Easy to read labeling, including chemical information and safety warnings (4 colors) Wide Mouth for easy filling. Self venting design to eliminate leaks & dripping. Transparent screw cap for easy identification Easy to control…

Six pack Wash Bottles, 1000ml capacity each Easy to read labeling, including chemical information and safety warnings (4 colors) Self venting design Made of low density polyethylene Color coded screw cap for easy identification (4 colors) Performance plastic with flex ink. Ink won't fade,…

These stylish sloped shoulder wash bottles feature an acute angled "swan neck" dispensing spout. Maximum temperature of low-density polyethylene is 80°C. Washbottle 250 ML Water (1210A92 ) Product Dimensions (l x w x h) : 0x2.153x8.625in Printed with a water…

Pack of two Isopropanol wash bottles, 500ml capacity each Easy to read labeling, including chemical information and safety warnings (1 color) Wide Mouth for easy filling. Self venting design to eliminate leaks & dripping Made of low density polyethylene (LDPE) Yellow color coded screw cap for…

INDUSTRIAL QUALITY High chemical durability & moderate heat tolerance. TRANSLUCENT & UNBREAKABLE Made from flexible, premium quality low density polyethylene plastic. WIDE MOUTH Large screw-cap opening for easy filling. LEAK & DRIP PROOF Features a sturdy, angled delivery tube…

Pack of two Distilled Water wash bottles, 1000ml capacity each Easy to read labeling, including chemical information and safety warnings (1 color) Wide Mouth for easy filling. Self venting design to eliminate leaks & dripping Made of low density polyethylene (LDPE) Clear screw cap for easy…

Wash bottle for Water, with easy to read labeling, including chemical information and precautionary statements. (2 Colors). 500ml capacity Blue cap with built in nozzle. Wide Mouth for easy filling Self venting design to eliminate leaks & dripping. Easy to control squeeze for dispensing Superior…

Chemical wash bottle with blank labels, 500ml capacity Blank label provides maximum flexibility, allowing user to write in contents and safety information Wide Mouth for easy filling. Self venting design to eliminate leaks & dripping Easy to control squeeze for dispensing Performance Plastics…

Produced from low density polyethylene (LDPE) Fitted with color-coded one-piece polypropylene (PP) closures that maintain their shape in use Feature square shoulders and a wide mouth for easy spill-free filling Closures feature precison jet-tip aperture for fine control

Two pack Wash Bottles, 500ml capacity each Easy to read labeling, including chemical information and safety warnings (4 colors) Self venting design Made of low density polyethylene Color coded screw cap for easy identification (4 colors) Performance plastic with flex ink. Ink won't fade,…

A customized plasticware assortment that is designed for general laboratory use. This kit offers the following: set of 5 beakers (50, 100, 250, 500, & 1000ml), Graduated cylinder set of 4 (10, 25, 50, & 100ml), 250ml Wash Bottle, 500ml Wash Bottle, 250ml PP Narrow Mouth Reagent Bottle, 500ml PP…

Two pack Wash Bottles, 500ml capacity each Easy to read labeling, including chemical information and safety warnings (2 colors) Self venting design Made of low density polyethylene Color coded screw cap, nozzle & chemical information for easy identification Pack of two chemical wash bottles…

Pack of six Sodium Hypochlorite (Bleach) wash bottles, 1000ml capacity each Easy to read labeling, including chemical information and safety warnings (4 colors) Wide Mouth for easy filling. Self venting design to eliminate leaks & dripping. Blue color coded cap for easy identification Easy to…

Unlabeled chemical wash bottle, 250ml capacity Wide Mouth for easy filling. Self venting design to eliminate leaks & dripping Easy to control squeeze for dispensing Performance Plastics by Eisco Labs Superior quality low density polyethylene (LDPE) construction with long lasting strength.…