Water Quality Test Kits Products (74)

Compare Tool

Select up to 3 products

  • Chlorine Bleach Test Kit

    For determining available chlorine in chlorine bleach or hypochlorite solutions Range: 1 drop = 0.005%, 0.05% or 0.5% Cl Sufficient for 50 tests at 0.1, 1.0 or 10%

  • Precision pH Test Kit

    Applications: Drinking Water, Environmental Education, Food and Beverage, Industrial Water Boiling and Cooling, Laundry and Sanitation, Water and Wastewater

  • Urban Water Test Kit

    Test tap water from any source and study the impact of urban water on the city’s environment. "Wet in the City," a hands-on kit, introduces the basic concepts of water chemistry–even to kids as young as third grade! Non-hazardous TesTabs® make "Wet in the City" an...

  • Total Iron Test Kit

    Octa-Slide Comparator Tests total iron after any ferric iron is reduced to ferrous in the sample Sufficient for 90 tests Ferrous and ferric iron may be tested separately by eliminating the reduction step. Octa-Slide has color standards representing 0.5, 1.0, 2.0, 3.0, 4.0, 6.0, 8.0 and 10 ppm Fe.

  • Hardness Test Kits

    Direct Reading Titrator (9859X42 and X43) For determining total hardness of water Range 0 to 200 ppm as CaCO3 in 4 ppm increments Titrators may be refilled to test higher concentrations Sufficient for 50 tests at 200 ppm Direct Reading Titrator (9859X72 and X73) For determining calcium,...

  • Sulfide Test Kits

    3322 Octa-Slide Comparator System For determining total sulfide Sufficient for 50 tests NPDES-EPA accepted Unit uses the Pomeroy methylene blue method for analysis. Total sulfide is determined using a color dye, which is added to an un-reacted sample until it matches a reacted sample. Octa-Slide has...

  • DPD Chlorine Tablets

    Most Widely used DPD Chlorine Tablets for Determining Free and Combined Chlorine DPD chlorine tablets employ DPD indicator (diethyl-p- phenylenediamine) to distinguish levels of free, combined, and total chlorine in a simple test sample. DPD chlorine tablets designated “Instrument Grade”...

  • Coliform Test Kit

    Yes/No qualitative test Sensitivity less than 2.2 per 100 mL of sample No incubation equipment required; only room temperature

  • Potassium Test Kit

    For determining potassium in natural waters and brine Turbidity tube is calibrated for 6, 8, 10, 20, 30, 40 and 50 ppm potassium Sufficient for 100 tests For replacement reagent, order 0534B49

  • DPD Chlorine - Bromine - pH Test Kit

    Kit Contains: 100 Chlorine DPD #1 Tablets 50 Phenol Red Tablets 3 Test Tubes, 2.5, 5, 10 mL, plastic w/ caps 1 Chlorine/Bromine Octa-Slide 2 Bar 1 Phenol Red Octa-Slide 2 Bar, pH 6.8-8.2 1 Octa-Slide 2 Viewer

  • Dissolved Oxygen Test Kits

    Direct Reading Titrator (9860J75 and J76) For determining dissolved oxygen in natural and treated waters Employs azide modification of Winkler method Range from 0 to 10 ppm with 0.2 ppm sensitivity Sufficient for 50 tests at 10 ppm Ideal for daily monitoring or D.O. meter checkups and backup. EPA...

  • DPD Chlorine Liquid

    All the benefits of DPD tablets in a liquid Can be used with existing LaMotte chlorine comparators or colorimeters Lower cost per test than tablets Quicker results and clearer colors than tablets DPD 1A and 1B reagents are added to a 5 or 10 mL sample to test free chlorine. DPD 3 reagent is added to...

  • Chlorine And Chloramines Test Kits

    Direct Reading Titrator (9859K40 and K41) For determining high range chlorine in water Range of 0 to 200 ppm Cl2 in 4 ppm increments Sufficient for 50 tests at 200 ppm. Uses Iodometric reagent method.

  • Aluminum Test Kit

    Octet Comparator Method For determining aluminum in water Sufficient for 50 tests Octet Comparator has color standards representing 0, 0.1, 0.15, 0.2, 0.25, 0.3, 0.4 and 0.5 ppm. A pink to red color will form when aluminum reacts with Eriochrome Cyanine R, at pH 6.

  • Sodium Test Kit

    Direct Reading Titrator For determining levels of sodium in natural and treated waters Range 0 to 500 ppm sodium in 10 ppm increments Test requires three titrations: one to determine bicarbonate and carbonate ions; one to determine sulfate and chloride ions; and one to determine calcium and...

  • Chlorine Test Kit

    This Chlorine test kit measures for Chlorine using the direct reading titrator method. Range/sensitivity is 0-10 ppm/0.2 ppm Cl. Applications: Drinking Water, Food and Beverage, Industrial Water Boiling and Cooling, Laundry and Sanitation, Water and Wastewater # Tests (# Rgts): 50 at 10 ppm (4)

Compare Tool

Select up to 3 products