Water Quality
-
Chlorine Test Paper Strips
LaMotteStrips chemically treated with starch and cadmium iodide measure total chlorine to determine the strength of sanitizers in cleaning solutions. Furnished in plastic vial of 200 1/4” x 3 1/2” strips, with color comparison chart, which has three standards 50, 100 and 200 ppm
-
Kit comes in a plastic case and contains everything needed to perform 30 tests (except distilled water): Refill, Low and High Range Comparators, dilutor snapper cup, micro test tube, and instructions. Range: 0-1000 & 1000-10,000 ppm MDL: 100 ppm Method: Direct Nesslerization …
-
Protects water baths and other water systems against the growth of algae, bacteria, molds and biofilms. Just 2ml per liter of water adds a blue tint which will fade after about 3 months reminding you to change the water and add new conditioner. Protects pumps and thermostats and helps…
-
Glycol CHEMets Kit
CHEMetricsEthylene glycol and propylene glycol are the primary ingredients in commercially-available antifreezes. They are used with various corrosion inhibitors to protect metal surfaces in cooling water systems. CHEMetrics glycol kits are used to monitor potable waters for glycol contamination…
-
Formaldehyde CHEMets Kit
CHEMetricsFormaldehyde, a toxic substance, is used in the following applications: metal plating baths, textile treatments, biological specimen preservatives, and disinfectants of medical equipment. Commercial formaldehyde gas is readily soluble in water. The Purpald Method Reference:…
-
Peracetic Acid Test Strips
LaMotte3 ranges of PAA test strips available covering low (0-50 ppm), medium (0-160 ppm) and high (0- 1,000 ppm) range concentrations The Insta-Test® 3000 test strips determine peracetic acid concentrations from 0-160 ppm. The test has a 10 second development time. The container has a desiccant liner…
-
MColortest™ pH Test Phenol red solution
MilliporeSigmapH: 7.0 - 7.3 (H2O, 20°C) Solubility: (20°C) soluble Density: 0.99 g/cm3 (20°C)
-
Chlorine Testing Dispenser
HF ScientificDPD Powder Pop® Dispenser with tests for Chlorine Compact and convenient Redesigned dispenser prevents clogging Dispense into round or square cuvettes Push button operation for precise dosing Portable dispensers accurately deliver the correct volume of DPD reagent for…
-
Method: colorimetric with test strips MQuant™ Storage class: 10 - 13 Other liquids and solids Storage: Store at +2°C to +8°C. The product quality of milk depends heavily on successful pasteurization. To verify this, the lactoperoxidase activity must be measured…
-
-
-
High Range QAC Test Papers
LaMotteApplications: Drinking Water, Industrial Water Boiling and Cooling, Laundry and Sanitation, Water and Wastewater 2951HR High Range QAC test papers are specifically formulated to read high range levels of QAC. Range and sensitivity is 200, 400, 600, 1000, 1500 ppm.
-
-
Chlorine/pH Dip Cellkit
LaMotteThe Free Chlorine and pH Analyzer test kit is designed to measure Free Chlorine levels from 0.5 to 10.0 ppm and pH from 6.8 to 8.2. The Free Chlorine and pH tests are measured using tablet reagents with a convenient DipCell comparator. The kit includes easy to read multilingual (English,…
-
-
Nitrate Nitrogen Test Kit
LaMotteThis Nitrate Nitrogen Test Kit tests for nitrate nitrogen levels using cadmium reduction which undergoes diazotization/coupling to form a pink color. Levels are determined using the Octa-Slide 2 comparator Range and sensitivity is 0.25, 0.5, 1.0, 2.0, 4.0, 6.0, 8.0, 10.0 ppm…
-
Hydrazine VACUettes Kit, Range: 0-25 ppm
CHEMetricsHydrazine is a powerful reducing agent that is used in various chemical processes and in boiler water as an oxygen scavenger. To control corrosion, residual hydrazine typically is maintained in the 0.05 to 0.1 mg/L range. Higher levels may be used to guard against corrosion when the boiler is out…
-
Quantofix Total Acid - box of 100 strips
MACHEREY-NAGELQUANTOFIX Total acid semi-quantitative test strips for the determination of total acid content as expressed as g of citric acid. Measuring range: 2-2.5-3.0-3.5-4.0-5.0 g/L Citric acid
-
Kit comes in a plastic case and contains everything needed to perform 30 tests (except distilled water): Refill, Low and High Range Comparators, dilutor snapper cup, micro test tube, and instructions. Range: 0-60 & 60-600 ppm MDL: 10 ppm Method: Direct Nesslerization …
-
Iron (Total & Ferrous) Vacu-vials Kit
CHEMetricsIron is present in nature in the form of its oxides, or in combination with silicon or sulfur. The soluble iron content of surface waters rarely exceeds 1 mg/L, while ground waters often contain higher concentrations. The National Secondary Drinking Water Standard for iron is 0.3 mg/L, as iron…
-
Nickel Test Kit
LaMotteOctet Comparator For detection of nickel in waste effluents and water supplies Employs dimethylglyoxime method Octet Comparator has color standards representing 0.5, 1.0, 2.0, 4.0, 5.0, 7.5, and 10.0 ppm nickel Sufficient for 20 tests
-
UN Number: UN3316 pH: (H2O, 20°C) strongly acid Solubility: (20°C) soluble Density: 1.079 g/cm3 (20°C)
-
UN Number: UN3316
-
Cyanide Test Kit
LaMotteOctet Comparator For determining trace levels of free cyanide in water Octet comparator has color standards representing 0.00, 0.10, 0.15, 0.20, 0.25, 0.30, 0.35 and 0.40 ppm Free CN - Sufficient for 50 tests
-
BrewLab® Basic
LaMotteTest for 7 Essential Factors Chloride Sulfate Alkalinity Total Hardness Calcium Hardness Magnesium Hardness Sodium
-
Kit Contains: 100 Chlorine DPD #1 Tablets 50 Phenol Red Tablets 3 Test Tubes, 2.5, 5, 10 mL, plastic w/ caps 1 Chlorine/Bromine Octa-Slide 2 Bar 1 Phenol Red Octa-Slide 2 Bar, pH 6.8-8.2 1 Octa-Slide 2 Viewer
-
Spectroquant® COD Cell Test
MilliporeSigmaAll necessary reagents for the analysis are contained in the cells Considerate packaging design protects the cells from fluctuation even in unfavorable environment Elimination of possible mistakes through barcode-system
-