Protects water baths and other water systems against the growth of algae, bacteria, molds and biofilms. Just 2ml per liter of water adds a blue tint which will fade after about 3 months reminding you to change the water and add new conditioner. Protects pumps and thermostats and helps…

Ethylene glycol and propylene glycol are the primary ingredients in commercially-available antifreezes. They are used with various corrosion inhibitors to protect metal surfaces in cooling water systems. CHEMetrics glycol kits are used to monitor potable waters for glycol contamination…

3 ranges of PAA test strips available covering low (0-50 ppm), medium (0-160 ppm) and high (0- 1,000 ppm) range concentrations The Insta-Test® 3000 test strips determine peracetic acid concentrations from 0-160 ppm. The test has a 10 second development time. The container has a desiccant liner…

Method Dissolved carbon dioxide (CO₂) is naturally present as a result of animal respiration, the decay of organic matter, and the decomposition of certain minerals. It is the major source of acidity in unpolluted water samples. Surface waters typically contain less than 10 ppm…

Hardness is a measure of the mineral content of water. Calcium and magnesium are the most common minerals that contribute to hardness. Hard water causes scaling in boilers and other industrial equipment, and diminishes the effectiveness of soaps and detergents. The EDTA Method (Total) …

The Insta-Test Low Range Hydrogen Peroxide Test Strips is a convenient way to quickly measure peroxide levels in water with fast dip and read results. Range and sensitivity is 0, 1, 3, 10, 30, 50 ppm.   Applications: Drinking Water, Industrial Water Boiling and Cooling, Laundry…

QUANTOFIX Peroxide 100 semi-quantitative test strips for the determination of hydrogen peroxide (H 2 O 2 ) and peroxides in solutions. Measuring range: 0-1-3-10-30-100 mg/L H2O2

Octet Comparator Method For determining hexavalent, trivalent, and total chromium Octet comparator has color standards representing 0.1, 0.2, 0.4, 0.6, 0.8, 1.0, 1.2 and 1.5 ppm Cr Sufficient for 20 tests Test requires suitable hot plate, not included Reagent Refill only. …

UN Number: UN3316

UN Number: UN3316

The Lovibond® calcium hardness calcio no. 1/no. 2 tablet set is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage. It contains 100 tablets.

Hach test strips are manufactured with a unique reagent pad at the tip, using proven chemistries based on standard reference methods. Just dip the strip, wait until color development occurs, and compare the color of the reacted pad to the chart printed on the bottle. Hach products are…

The DPD method is elementary for the determination of chlorine and for the correct dosing of the water care product. The DPD No.1 tablet is used to determine the free chlorine. The tablet is placed in a cuvette with a few drops of the water sample and crushed, sample water is added and mixed by…

The Micro Check Test Strips are an accurate, inexpensive and safe alternative for reagent chlorine testing. Quick, accurate and easy to use results are achieved in under 1 minute.  Free Chlorine with sensitivity as low as 0.05ppm (mg/L). Micro Check free, detection levels ppm (0, 0.1,…

UN Number: UN2796

Phosphorus occurs naturally in rock formations in the earth's crust, usually as phosphate. High phosphate concentrations in surface waters may indicate fertilizer runoff, domestic waste discharge, or the presence of industrial effluents or detergents. Although phosphates from these sources are…

Sulfides are naturally present in ground waters as a result of leaching from sulfur-containing mineral deposits. Surface waters do not usually contain high sulfide concentrations. Sulfides result from the decomposition of organic matter, from bacterial sulfate reduction under anaerobic conditions…

Molybdate is used throughout the industrial water treatment and power generation industries as a corrosion inhibitor in both open- and closed-loop cooling water systems. In solution, molybdate anions complex with oxidized iron to form a protective film of molybdate and ferric-oxide. Molybdate is…

Hydrazine is a powerful reducing agent that is used in various chemical processes and in boiler water as an oxygen scavenger. To control corrosion, residual hydrazine typically is maintained in the 0.05 to 0.1 mg/L range. Higher levels may be used to guard against corrosion when the boiler is out…

QUANTOFIX Sulphate semi-quantitative test strips for the determination of sulphate in solutions. Measuring range: 200->400->800->1200- >1600 mg/L SO42-

This kit tests for Sodium Nitrite using the Direct Reading Titrator method. Applications: Industrial Water Boiling and Cooling, Water and Wastewater Range/sensitivity is 0-1000 ppm/20 ppm NaNO₂

Consumables & accessories for Sartorius Arium laboratory water systems. Arium® Smart Station flexible remote dispenser Ultrapure Water for benchtop or wall-mounted installation. The Arium® Smart Station is designed for flexible remote dispensing of ultrapure water directly at the…

UN Number: UN3316

UN Number: UN3316

This kit tests for Chloride in fresh water samples using the Direct Reading Titrator method. Applications: Environmental Education, Aquarium and Fish Farming

UN Number: UN3316

This LaMotte Phosphate test kit tests for low range Phosphate using the LRC Comparator. Range and sensitivity is 0, 0.2, 0.4, 0.6, 0.8, 1.0, 1.5, 2.0 ppm PO43-. Applications: Environmental Education

UN Number: UN3316

3322 Octa-Slide Comparator System For determining total sulfide Sufficient for 50 tests NPDES-EPA accepted Unit uses the Pomeroy methylene blue method for analysis. Total sulfide is determined using a color dye, which is added to an un-reacted sample until it matches a reacted…

Insta-TEST® Chlorine Dioxide is a convenient way to test for Chlorine Dioxide levels in sanitized water. Range and sensitivity is 0, 10, 25, 50, 100, 250, 500 ppm. Range and sensitivity is 0, 0.25, 0.5, 1, 3, 10 ppm.