Add to fluid handling setups already in place Accommodates wide vessels by pulling on end to expand ring id Vikem ® vinyl coating protects glassware Rings fit neatly around the neck of filtering flasks with side-arm tubing connections. No need to disconnect the tubing …

Thomas Scientific Calibration Weights are solid construction and made with non-magnetic stainless steel. OIML E2 can be used as a reference standard in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg.…

Calibration Consistency: We address every variable of our measurement process to assure consistency of calibration results which lead to accurate results in your processes, products, and services. Alloy 8 Advantage: Troemner Alloy 8 Stainless Steel is the finest grade of stainless steel…

High Gloss Polish: Experience, combined with special skill acquired through years of weight polishing guarantee the consistent high quality for all customer demands. Weight Calibration Performed by Robots: Substantial investments in cutting-edge robot technology combined with decades of…

METTLER TOLEDO's world leading expertise in metrology extends to weights, weight sets and weight calibration services. The weight portfolio covers OIML weights from fifty micrograms to five tons in all accuracy classes. Our weights are used all over the world, not only for testing balances but also…

The weight tolerance is equal to ANSI/ASTM E617 Class 0 and exceeds OIML R 111 Class E2. This class is used as a reference standard for calibrating other reference standards and weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.01 mg.

Single hooked weight made of high quality iron 500 metric grams Total length of 4.25" with a 1.5" width. Features a slotted bottom with a bar for the ability to hook additional weights underneath Ideal as additional or spare part for hooked weight sets This single hooked weight is made of…

Perfect for stabilizing glassware and laboratory containers! Argos Technologies® lead ring weights are ideal for stabilizing glassware and laboratory containers during water immersion. The vinyl coating prevents scratching on labware or the benchtop. The "C" shaped rings have…

The Sartorius by Troemner brand is the collaboration between two of the most well established and trusted names in the fields of weighing technology and mass metrology. Everything You Need in One Convenient Case Cal-Paks contain (3) high-quality, precision Alloy 8 weights, which can be used…

The weight tolerance is equal to ANSI/ASTM E617 Class 0 and exceeds OIML R 111 Class E2. This class is used as a reference standard for calibrating other reference standards and weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.01 mg.

Class E2 Can be used as a reference standard in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg.

Class E2 Can be used as a reference standard in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg. NVLAP Accredited Certificate Troemner's NVLAP Accredited Certificate provides compliance in…

Class 2 Appropriate for calibrating high-precision top loading balances with a readability as low as 0.01 g to 0.001 g.

Class 1 Can be used as a reference standard in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg. Flat with one end turned up for easy handling Supplied in high quality polycarbonate case with…

UltraClass The weight tolerance is equal to ANSI/ASTM E617 Class 0 and exceeds OIML R 111 Class E2. This class is used as a reference standard for calibrating other reference standards and weights and is appropriate for calibrating high-precision analytical balances with a readability as low as…

Class 1 Can be used as a reference standard in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg. Sets are supplied in a rugged polypropylene case with a handle on top. Foam insert has compartments…

Single hooked weight made of high quality iron 20 metric grams Total length of 1.25" with a 0.6" width. Features a slotted bottom with a bar for the ability to hook additional weights underneath Ideal as additional or spare part for hooked weight sets This single hooked weight is made of…

Class E2 Can be used as a reference standard in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg. Statement of Accuracy Every Troemner Weight and Weight Set, with the exception of Economical…

Made of premium quality brass Ideal for use with slotted weights Great tool for physics experiments Precisely machined for accuracy. Excellent tool for physics experiments. Single mass hanger. Ideal as spare or extra part to full slotted weight sets.

These weights are manufactured Troemner Alloy 8 Stainless Steel, which was developed by Troemner and is available exclusively through Troemner. This unique material possesses low magnetic susceptibility, uniform consistency and high resistance to corrosion. It is the finest grade of stainless steel…

Class 2 Appropriate for calibrating high-precision top loading balances with a readability as low as 0.01g to 0.001g.

Low magnetic permeability and high corrosion resistance ensure reliable values. All weights are made of stainless steel, even for mg weights no aluminum is used. Weights are manufactured under METTLER TOLEDO’s stringent ISO9001 quality management system. Unique Design METTLER TOLEDO…

UltraClass The weight tolerance is equal to ANSI/ASTM E617 Class 0 and exceeds OIML R 111 Class E2. This class is used as a reference standard for calibrating other reference standards and weights and is appropriate for calibrating high-precision analytical balances with a readability as low as…

The weight tolerance is equal to ANSI/ASTM E617 Class 0 and exceeds OIML R 111 Class E2. This class is used as a reference standard for calibrating other reference standards and weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.01 mg.

Cast Iron slotted weight Spare weight / replacement Painted Black

Stabilize labware in water baths and on the benchtop Added security and accessibility For beakers and flasks Weighted holders allow beakers or flasks to be secured and placed into a water bath with full access to the vessel opening. The Vikem® vinyl coated lead ring has been…

This weight hanger is made from steel that has been nickel-plated. It weighs 50g and can be used to hang additional slotted weights (not included). PRODUCT WARNINGS WARNING: This product can expose you to chemicals including nickel and lead, which are known to the State of California…

Performs routine testing of balances securely with only what you need - two test weights ASTM and OIML Weights available Saves time and money Includes tweezers, gloves and other accessories for professional weight handling Test balances with up to 4900 g weight capacity CarePac® offers a…

The OHAUS 100 grams calibration weight is suitable for use with mechanical and electrical balances as well as scales. It is ideal for use in laboratories, educational purposes and industrial purposes.

This slotted weight set includes the following: Ten 10g plastic slotted weights One 10g hanger PRODUCT WARNINGS WARNING: This product can expose you to chemicals including styrene, which are known to the State of California to cause cancer, birth defects, or other…

The weight tolerance is equal to ANSI/ASTM E617 Class 0 and exceeds OIML R 111 Class E2. This class is used as a reference standard for calibrating other reference standards and weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.01 mg.

Class 1 Can be used as a reference standard in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg.