Build your own series circuit using the handy Create-A-Circuit-Kit. It comes complete with a "D" cell battery holder, a knife switch, two miniature light bulbs, two lamp holders, and four connector cords. Instructions are included.

Well-constructed and attractive electric bell model mounted on a clear acrylic plate and a finished wooden stand. Functional parts are clearly seen. Operates on 6V d.c. with on/off switch, adjustable contact screw, and binding posts for easy connection.

This versatile multimeter includes AC voltage, DC voltage, DC current, continuity, resistance, transistor and battery test modes. Features an easy-to-read 3.5” digital LCD display. Supplied with two 24 in. 18 gauge test leads. Requires one 9V battery (included).

This large van de Graaff generator uniquely offers alternative drive modes, either hand-cranked or motor driven. Excellently constructed, the generator reliably delivers charge and sparks 10cm long and more immediately on setting it in motion, even under high humidity conditions. In hand-cranked…

This unique hand generator is an easy yet effective way to teach how AC and DC electricity is produced. Banana plugs can be inserted into the different connectors to change from AC to DC electricity. The unit has a clear base for easy demonstration of connections. Includes an activity guide.

This 3V conductivity tester demonstrates the electrical properties of various liquids. The item consists of a molded plastic lamp socket mounted on a base with 2 binding posts for connecting a wire cord. It comes complete with bulb, glass tumbler, and instruction manual.

This miniature DC motor is designed for experiments using low starting voltage (4.5V) and current (70mA). Speed: 1000-5000 RPM. Motor is approximately 34mm long x 24mm in diameter. Shaft size is 10mm long x 2mm in diameter. Includes soldered-on 7" lead with alligator clips.

Our Digital Voltmeters are simple, have an easy-to-read display, and run on a 9V battery. We sell several different voltmeters with different ranges of measurable voltages. PRODUCT WARNINGS WARNING: This product can expose you to chemicals including styrene and lead, which are known…

This basic breadboard kit contains all of the basic connecting parts to start exploring circuit design. The kit includes a variety of connecting cord sizes and two breadboards. All that is required is to provide components such as resistors, LEDs, or capacitors. Kit Contents: …

This comprehensive kit allows students to plot equipotential lines in an electric field between two electrodes held at different electric potentials. A simple setup keeps electrodes partially immersed in water containing an electrolyte, allowing a small current to flow between the…

The Electrostatics Kit is a collection of materials designed for students to investigate the creation of charges through friction between various rods and fabrics. Contents include: Hollow Glass Friction Rod (1) Glass Friction Rod, Half Ground (1) Ebonite Rod (1) String, 10' (1) …

Miniature LED yellow light bulb holder module for Genecon V3 The LED lamp can directly connect to Genecon V3 without any cables. Convenient in students’ experiments with energy consumption, comparison of lighting time between the miniature bulb and LED lamp using capacitor…

This sturdy electroscope features a metal case with front and rear glass windows for preventing air currents from affecting the deflection of the leaves. Leaves are gold and aluminum. Leaf support rod is held in place by an insulating plastic sleeve. A graduated scale is also provided for measuring…

We offer a superior quality Wimshurst machine for demonstrating high voltage electric charges. Our unit features acrylic rotating disks, good quality foil strips and brushes, insulated cylindrical capacitors, and a durable plastic platform. Guaranteed to produce large sparks for easy…

This Electricity System 1 Physics Kit comes with 51 components, including a Circuit Board, and all the resistors, lamps, voltmeters and ammeters one needs to investigate core concepts in introductory electricity. With this kit students can explore common experiments such as Ohms Law, Series and…

This simple and ingenious device quickly and graphically shows students how different metals conduct heat at different rates. It consists of four identically-sized bars of common metals - steel, brass, aluminum, and copper - mounted parallel to one another in a plastic support. Attached to each bar…

Our flat metal electrodes are 18mm by 100mm (approximately 0.75" by 4"). We carry electrodes made from seven different metals: aluminum, brass, copper, iron, zinc, nickel, and tin. Use them in your own experiments with electricity.   PRODUCT WARNINGS WARNING: …

The Eisco Magnetics System 1 Kit includes 18 components and 7 experiment guides needed to investigate the core concepts of magnetism. Students can use this kit to investigate the core concepts in introductory magnetism. Includes an Experiment Guides for the following activities: Magnetic and…

An economical electroscope consisting of aluminum leaves mounted on a metal rod (item #4-50160) held by a rubber stopper in a 250ml flask. Instructions included. The rod assembly can be use as a replacement unit on 4-50150 or 4-50170. The rod assembly is an aluminum rod with an aluminum ball…

Operates on 1.5V or 3V DC. Speed: 7000-11000 RPM. Motor is 40 MM long x 20Mm in diameter. Shaft size: 2 MM diameter x 8 MM long.

Our meters are mounted in black plastic cases. Meters have a scale length of 75mm, offer +/- 2.5% accuracy and come with 5-way binding posts and an external zero-setting screw. Meters are not protected against prolonged or significant overload. Stackable for storage.

Our Digital Ammeters are simple, have an easy-to-read display, and run on a 9V battery. We sell several different ammeters with different ranges of measurable amperages. PRODUCT WARNINGS WARNING: This product can expose you to chemicals including styrene and lead, which are known to…

Flexible, 18swg stranded wire cord with a stackable banana plug at one end and an alligator clip at the other end. Alligator clip has a protective vinyl sheath.

Connector cords are useful in various electricity experiments, as well as in many apparatuses that require connections to power supplies. All of our connector cords are made of 18-gauge insulated wire. These connector cords have alligator-clips on each end. Alligator-clip ends are useful for useful…

Fahnestock Clips supplied in packs of ten.

Friction pads are 12"; x 12";. For use with Friction Rods to demonstrate Static Electricity.

Helmholtz coils are useful for creating near-uniform magnetic fields or for cancelling out external magnetic fields, such as the earth’s. The field between the two solenoids is at its most uniform when the distance between them is equal to the radius of the solenoids. This can also be used with a…

Plastic Insulated Copper wire is 22 gauge, supplied in 100 foot rolls and available in three colors. Bare Nickel Chromium Wire is supplied in 4 ounce spools. Enameled Copper Magnet Wire is supplied in 4 ounce spools. Soft Bare Copper Wire is available in 4 ounce or 1 lb spools.

Compact analog multimeter offers popular features such as AC voltage, DC voltage, DC current, Ohms, measures capacitance and decibels, and comes with overload protection and diode test. Includes test leads and instruction manual. Operates on 2 AA size batteries (included).